trickydicky Posted May 31, 2010 Share Posted May 31, 2010 hi i have a 2.5td when its under load it has a miss fire but in tickover its fine has anybody got any advise before i start buying bits randomly? Quote Link to comment Share on other sites More sharing options...
errol209 Posted May 31, 2010 Share Posted May 31, 2010 hi i have a 2.5td when its under load it has a miss fire but in tickover its fine has anybody got any advise before i start buying bits randomly? I'd go for a timing issue first, as it isn't doing it all the time (so not injectors). When you say under load, is that always or only at high revs or only at low revs? When did you last do the timing belt (and fuel filter)? Quote Link to comment Share on other sites More sharing options...
trickydicky Posted May 31, 2010 Author Share Posted May 31, 2010 I'd go for a timing issue first, as it isn't doing it all the time (so not injectors). When you say under load, is that always or only at high revs or only at low revs? When did you last do the timing belt (and fuel filter)? the timing was done 18 months ago and it was spot on but the cogs where showing sighns of wear the filters where done about the same time it only happenes when i chang to 4th 0r 5th until the revs pick up or going up a steep hill Quote Link to comment Share on other sites More sharing options...
trickydicky Posted June 1, 2010 Author Share Posted June 1, 2010 thinking about it could it be a rumble /judder from the gearbox or transferbox perhaps and not a miss fire at all? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.