jalmassi Posted June 4, 2011 Share Posted June 4, 2011 Okeydokey probably the silliest question of the night.....no pressure on the clutch, pumping the pedal shows no change in reservoir so took out the master, dismantled cleaned all the black gunk out and reassembled. Now testing the plunger by hand there is still no fluid being pumped out. I did clean the tiny wee hole with a wire so I know it was open before the reassembly but nothing.......Any help or humor much appreciated....!!!! Quote Link to comment Share on other sites More sharing options...
Fett Posted June 4, 2011 Share Posted June 4, 2011 are there not seals to change? I managed to get an ap lockheed complete unit for mine for only £45 , might be worth just swapping it Quote Link to comment Share on other sites More sharing options...
stuck Posted June 4, 2011 Share Posted June 4, 2011 The "black gunk" is probably what used to be the seals Quote Link to comment Share on other sites More sharing options...
Fett Posted June 4, 2011 Share Posted June 4, 2011 Quote Link to comment Share on other sites More sharing options...
jalmassi Posted June 5, 2011 Author Share Posted June 5, 2011 Definately part of the old seals..!!!! But seriously with a good master with new seals when operating the plunger by hand should not fluid be pumped out ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.