zardos Posted August 23, 2011 Share Posted August 23, 2011 Has anybody tried drive an ETB Digidash 2(http://www.etbinstruments.com/DD2_lite.htm) Rev counter off the IDM signal from the EDIS (as suggest by megamanual)? or do I need to build the circuit suggested as digidash2 is normally driven of the -ve of the coil or ecu signal. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 24, 2011 Share Posted August 24, 2011 I'd be surprised if IDM doesn't work, but you can use a small circuit in the ECU instead as detailed in http://msextra.com/doc/index.html outputs section. Quote Link to comment Share on other sites More sharing options...
red90 driver Posted August 27, 2011 Share Posted August 27, 2011 I've got ours working from the tach output signal on the MS. Worked straight away and no other changes required. Quote Link to comment Share on other sites More sharing options...
zardos Posted August 28, 2011 Author Share Posted August 28, 2011 To answer my own question the digidash works fine from the IDM signal from the EDIS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.