dad Posted June 2, 2012 Share Posted June 2, 2012 I need to repace the sill on my disco so I can fit a set of rock sliders do you know what size box section I need to get Cheers Ian Quote Link to comment Share on other sites More sharing options...
lyron Posted June 2, 2012 Share Posted June 2, 2012 60mm x 120mm box section should fit quite well. thats what i used on our old 200tdi3 door, ron. Quote Link to comment Share on other sites More sharing options...
fozsug Posted June 2, 2012 Share Posted June 2, 2012 i used 100x60x5mm Quote Link to comment Share on other sites More sharing options...
ajh Posted June 2, 2012 Share Posted June 2, 2012 If you're replacing the sills; why not just use something a bit bigger and heavier and skip the added sliders? Quote Link to comment Share on other sites More sharing options...
dad Posted June 3, 2012 Author Share Posted June 3, 2012 The main reason for fitting sliders is it act's as a step for the wife as it is lifted Quote Link to comment Share on other sites More sharing options...
Mean Green Posted June 3, 2012 Share Posted June 3, 2012 Weird I came online to ask exactly the same question... does anyone have a design for a replacement sill with rock slider and tree slider bar? Quote Link to comment Share on other sites More sharing options...
Niamh Posted June 3, 2012 Share Posted June 3, 2012 The main reason for fitting sliders is it act's as a step for the wife as it is lifted You could just fit sidesteps for that Niamh Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.