need4speed Posted July 11, 2013 Share Posted July 11, 2013 Went to fit the front brake servo and a bit fell out the middle. Ive attached a few pics showing what fell out of where. My question is, is it fubar'd or can i rebuild it? Quote Link to comment Share on other sites More sharing options...
western Posted July 11, 2013 Share Posted July 11, 2013 that's the pushrod to operate the master cylinder, it might snap back into place. Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 11, 2013 Author Share Posted July 11, 2013 I tried that but it just keeps falling straight back off... Quote Link to comment Share on other sites More sharing options...
western Posted July 11, 2013 Share Posted July 11, 2013 new servo time then, more horror for your nearly dead piggybank to suffer. http://www.brit-car.co.uk/product.php/373480/5497/brake_servo_type_80_def__ha Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 11, 2013 Author Share Posted July 11, 2013 Oh well. If needs be... Thanks for the link Ralph Quote Link to comment Share on other sites More sharing options...
western Posted July 11, 2013 Share Posted July 11, 2013 is that the small diameter but thick early servo, or the bigger/thinner 300tdi on version, if the latter I have a good used one here. Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 12, 2013 Author Share Posted July 12, 2013 Oh bugger. Wish id logged back on here first thing this morning as ive already ordered it Ralph On a slight aside, where does the hose coming off it connect to? Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 12, 2013 Author Share Posted July 12, 2013 Scratch that last question. I think it will connect to my v8 plenum somewhere... Quote Link to comment Share on other sites More sharing options...
western Posted July 12, 2013 Share Posted July 12, 2013 it's only a bit of hose, your local car spares shop should be able to get some if the existing is not long nough, not to worry, god to read you've sourced a new servo. Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 17, 2013 Author Share Posted July 17, 2013 New brake servo arrived this morning - happy Phil! Rubber seal that goes between servo and pedal box missing - sad Phil! I threw the old original one out as it was a bit perished thinking a new one would come with servo.....WRONG! Looking at parts catalogue i cant find it. Does anyone know the part number for this? Quote Link to comment Share on other sites More sharing options...
western Posted July 17, 2013 Share Posted July 17, 2013 seal on master cylinderinner body end to servo is part of the master cylinder seal kit, it's not listed as a seperate part, at least I can't find it in my parts info. similar question here http://forums.lr4x4.com/index.php?showtopic=84714 I can't find a seal betwwen servo body to pedal case either where it attaches with the 4 bolts. pedal box seal to bulkhead is ANR6333 item 10 in http://lrcat.com/#31/4/53769 sorry Phil. Quote Link to comment Share on other sites More sharing options...
need4speed Posted July 17, 2013 Author Share Posted July 17, 2013 No worries Ralph. I think i may have found it... LR Series list NRC9169 as "Servo To Pedal Box Seal" though it doesnt show a picture. Ive taken a punt and ordered one anyway as i cant imagine what else that could be... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.