muddyplugger Posted November 4, 2006 Share Posted November 4, 2006 Has anyone replaced the door latch/motor assembly on a Series II disco? The central locking does not pop it up, but locks it OK. I had the door skin off today and can feel a slight click within the latch itself when it tries to unlock. Unfortunatly its not like the good old 200/300's with a separate actuator, the whole thing is one unit! (Incase any one searches in the future the part no is FQJ102890, £58 is the cheapest!) My queston is that can the latch be removed without taking the window frame out like it suggests in the Workshop Manual? - Cos that looks like a real faff on! Quote Link to comment Share on other sites More sharing options...
BogMonster Posted November 4, 2006 Share Posted November 4, 2006 I seem to recall the guys at work taking them out and I seem to recall seeing window frames lying on the floor so I don't think so but could be wrong on that... Quote Link to comment Share on other sites More sharing options...
muddyplugger Posted November 4, 2006 Author Share Posted November 4, 2006 B*gger! The frame does seem rather tight against the lock, so I guess I was just hoping it may be ok. Quote Link to comment Share on other sites More sharing options...
BogMonster Posted November 4, 2006 Share Posted November 4, 2006 Worth a try - after all the WSM is not always 100% right on what can and cannot be wriggled in and out of places! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.