Ben Reedy Posted August 8, 2005 Share Posted August 8, 2005 I've been offered a transfer box for £50, at that price if it's a bad 'un I haven't lost anything. Current box is begining to rumble so I'd like to have a spare waiting in the shed. The seller says it's a "1.4". My 90 is one of hundreds of 1986 ex-MOD 2.5 diesels around. It has 750x16 tyres. Am I right in thinking it will be an LT230R box? What would be the ratio, then? My workshop manual doesn't help at all here. Quote Link to comment Share on other sites More sharing options...
Rob Stewart Posted August 8, 2005 Share Posted August 8, 2005 Morning Ben, It should be a 22D LT230R and has a 1.410 Ratio, the number should be stamped on the bottom left of the main casing when looking from the rear just to the left and below the filler plug. Kind Regards, Rob. Quote Link to comment Share on other sites More sharing options...
Ben Reedy Posted August 8, 2005 Author Share Posted August 8, 2005 Hello Rob! Haven't heard from you for a year or two. Looks like everyone has defected over here. Thanks for the advice, I'll check tonight. Quote Link to comment Share on other sites More sharing options...
JST Posted August 8, 2005 Share Posted August 8, 2005 despite its age theres probably a sticker underneath the fill plug stating 1.4 or 1.6 etc as well. it will be a 1.4 more than likely. Quote Link to comment Share on other sites More sharing options...
landi41 Posted August 8, 2005 Share Posted August 8, 2005 Rob Stewart, good to see you back............. Western (Ralph) has been doing an admirable job with part #'s in your absence Quote Link to comment Share on other sites More sharing options...
western Posted August 8, 2005 Share Posted August 8, 2005 (edited) Ben, that's the same ratio as my 110's transfer box Welcome back Rob, hope everything is OK Cheers Dave Edited August 8, 2005 by western Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.