DrRob Posted July 28, 2016 Share Posted July 28, 2016 New bottom hose, new jubille clip, new water pump (Airtex). Why is there now a small weep from the hose/pump interface? (above the jubilee clip) Have moved the hose and clip a bit but still weeps - when cold and hoses squeezed. Weird. Will try a new clip and move the hose down the pump cating a bit and clamp just behind the ferruled casting. After that, will try a new hose....current one might be faulty.... Anyobdy had this before? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted July 28, 2016 Share Posted July 28, 2016 Rough casting? Quote Link to comment Share on other sites More sharing options...
DrRob Posted July 28, 2016 Author Share Posted July 28, 2016 Could be I guess but would expect better from Airtex. Will have a look.... Quote Link to comment Share on other sites More sharing options...
DrRob Posted July 30, 2016 Author Share Posted July 30, 2016 Casting is a little rough which is not good for Airtex. Reseated hose with new clip and I think it's worked. Time will tell..... Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted July 30, 2016 Share Posted July 30, 2016 Even a small weep will slowly stop as it crusts up nicely Quote Link to comment Share on other sites More sharing options...
DrRob Posted August 1, 2016 Author Share Posted August 1, 2016 Hope so....not going to rush and swap hose or pump just yet..... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.