carlosbeldia Posted August 19, 2016 Share Posted August 19, 2016 Good day. Im havinsg some problems with my partial odometer in the TD5 it resets by himself and havent found why. Also, normally the total odometer stays on when I take the key off, but now it randomly goes blank the total odometer is working great, but the partial keeps going to zero and is kind of annoying. Have checked all the connections you can find in the rave, but no results. Took every fuse and the odometer keeps on, only when disconnecting main fuses it goes off, so I dont have a clue in what connector, fuse or relay I have to look.. any idea? Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted August 21, 2016 Author Share Posted August 21, 2016 Somebody? Quote Link to comment Share on other sites More sharing options...
western Posted August 21, 2016 Share Posted August 21, 2016 all the info you need is in here http://www.retroanaconda.com/landrover/2009/10/installing-defender-td5-gauges-into-a-200tdi300tdi/ & http://www.retroanaconda.com/landrover/gauges_diagram.pdf or in the wibbly wobbly speedo thread in Defender forum. Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted August 22, 2016 Author Share Posted August 22, 2016 Thanks a lot Western. I hace just read the thread but it seems that ink talks about Speedo, but not the partial odometer.... Quote Link to comment Share on other sites More sharing options...
western Posted August 22, 2016 Share Posted August 22, 2016 the speedo connections are in the link, if it's not working correctly then it's probably faulty, PM Mr Cwazy Wabbit on here, he has opened a few & might be able to help. Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted August 22, 2016 Author Share Posted August 22, 2016 Thanks man, I'll write to him. My doubt comes since there are no related fuses between speedo and odometer... Quote Link to comment Share on other sites More sharing options...
western Posted August 22, 2016 Share Posted August 22, 2016 odometer on my Td5 speedo has a fused permanent 12v feed so it stays visible when vehicle is parked & switched off. found my wiring info for fitting my td5 speedo, upper pink plug pin 6 brown/blue wire via a 5amp fuse [upper centre] should be a 12v permanent live feed & pin 9 purple/brown wire via a 5amp fuse [lower row bottom right] is also a 12v permanent feed & pin 10 [upper row right upper corner] should be a ignition switched feed white/green wire via a 10amp fuse Quote Link to comment Share on other sites More sharing options...
carlosbeldia Posted August 22, 2016 Author Share Posted August 22, 2016 Thanks a lot, tomorrow will check all these connections. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.