siral Posted November 4, 2015 Share Posted November 4, 2015 Hi i did an engine and auto swap on my 2006 td4 but since i swapped everything over i have problems with it seems like the auto box is overheating it will go into drive no problem although 2nd gear seems abit ify to change gear but after 5 mitles it looses drive forward and reverse let it cool down for ten mins and then it will drive again. I took it back and thought it might just be the rest of the old oil in the box still there, so drained it again and re-filled but put an extra 1/2 litre in. As i thought it might be overheating. Took it out again same problem again now it is coming up F4 can any one give me any advice on this problem or how to cure it please. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted November 4, 2015 Share Posted November 4, 2015 F4 is just a generic gearbox fault, can you get the codes read properly? Quote Link to comment Share on other sites More sharing options...
siral Posted November 4, 2015 Author Share Posted November 4, 2015 I HAVENT HAD IT ON A COMPUTER YET AS I STAY ABIT AWAY FROM ANYWHERE I CAN GET IT DONE AND NOW DONT WANT TO DRIVE IT NOW TILL I TRY AND GET IT FIXED AS PROBABLY ABOUT 20 MILES AWAY Quote Link to comment Share on other sites More sharing options...
tacr2man Posted November 4, 2015 Share Posted November 4, 2015 Where are you , as someone might be near you with a hawkeye etc . Quote Link to comment Share on other sites More sharing options...
siral Posted November 5, 2015 Author Share Posted November 5, 2015 I am inbetween Glasgow and Edinburgh thanks for reply's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.