-
Posts
114 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by dicsosfa
-
rear cross member exhaust bracket for a 90
dicsosfa replied to dicsosfa's topic in Requests for Part Numbers
Thanks again western -
hi after the part number for the rear cross member exhaust bracket for a 90 can find one for 110/130 but not a 90 ? thanks Roy
-
hi thinking of changing the colour of my 90 which is blue at the moment and i have seen this one can i do the prep myself and the best method of doing it , whats involved ie time, cost, whats needed and the final cost of a respray ? and most important what is the colour ? and yes its orange lol thanks Roy
-
Hi my son wants a tow bar on his 1986 landrover 90 , wil a 200 or a 300 fit if not what will he need and the part numbers for it thanks Roy
-
Thread size in underside of rear crossmember
dicsosfa replied to Boris113's topic in Defender Forum (1983 - 2016)
Hi Try this http://www.numcat.ru/landrover/p/31/52566/ Roy -
Hi Have done a rear crossmember replacement on my 300 tdi 90 I just need the u shaped plastic clips that hold the wiring to the rear crossmember to both sides as I only managed to remove I've intact Thanks Roy
-
crossmember and towbar nuts and bolts
dicsosfa replied to dicsosfa's topic in Defender Forum (1983 - 2016)
Thanks for that bolts purchased now Roy -
hi going to replace my crossmember on tuesday, so i am just going to cut the towbar bolts and the 2 bolts on either end of the crossmember to tub got the three centre ones undone as they have captive nuts. so i need sizes of nuts and bolts for the tow bar plate on to rear crossmember x4 / towbar bracing legs from tow bar to chassis x 4 and the 2 that go up into the bottom of the crossmember, have got new towball with a free bolts from a mate Thanks Roy
-
hi found out its just under 25kgs and have got a pricee of £30 cash it will need to have the black spray paint removed first found someone to do it for £15 also he can do any parts that you can get to him he's done a few series 1 and 2 bulkheads in the past and he will drop it of at the galvanisers on the same day, so all sandblasted and galvanised for £45 a bargain i think .. i will have it galvanised upto the extensions so no need to grind before welding. Roy
-
Hi they want to know its weight cause they charge by the kilo , will grind galvanising off,weld it on then wax oil the inside only galvanising it as I want it to last and I can't afford a full new galvanised chassis at the mo lol
-
hi going to replace my rear crossmember very soon and want to know how heavy the new one will be as i am going to get it galvanised but they can not give me a price without knowing the weight, i think it maybe a good investment in the long run. so does anyone have a rear crossmember with extentions that they can stick on some bathroom scales or had one delivered and have packing with weight on the label and let me know how much it weighs and yes its a strange request lol lol lol
-
hi, popped in to see a friend 0n saturday and whilst going for a spin with him ,i pulled up at some traffic lights and he said he could her the turbo whistling i said he is hearing things but upon checking it out on his drive he was right even on little more than tick over the turbo is merrily whistling away . so question is this a stuck actuator, if so how do i test it ? if so can it be freed in situ or will it have to come off and how hard is it to do ? i am not down on power or getting a lot of smoke. thanks Roy
-
hi towed my trailer today and noticed that the trailer warning light only flashed once with the indicators, but the trailer lights all work as they should is there a relay if so where ? second thing is i notice that with or without trailer connected if i use the hazzards only the trailer warning light flashes and not the arrows any idea's thanks Roy
-
hi just wondered if LR fitted a square dash clock i think only on the early 90's is this true as a mate seems to think they did and wants one for his 90 any idea's or maybe a part number thanks Roy
-
hi looking for some pop rivets for general use whats the best sizes and type to obtain thanks Roy
-
hi going to be changing standard front bumber for a 4"x 2" 3mm box section so expecting the old bolts to snap so need part numbers for the 2 bolts and the nuts iirc nuts are on a plate together thanks Roy
-
hi looking for some new skins for a 200 tdi with push button front doors, does anyone know where i can buy some from thanks Roy
-
nope 1-1 cause man at the mot said ok but very unsafe practice so son has now put some more at's on thanks for the info to all that replied Roy
-
hi all i want to settle a argument with my son as to his 90 and his pending mot he had a set of alloy wheels given to him but 2 are at and 2 are mud and he thinks that they will pass its mot with them on , i think they should all be at or mt not both thanks Roy
-
Hi just a quick question will a starter motor from a 200/300 disco fit a 1991 200tdi as a friend at work has a faulty one Thanks Roy
-
thanks
-
Hi does anyone know the part number for the front wipers on a C reg 90, they are for my sons lr thanks Roy