[rear cross member exhaust bracket for a 90]

Thanks again western

[rear cross member exhaust bracket for a 90]

hi

after the part number for the rear cross member exhaust bracket for a 90

can find one for 110/130 but not a 90 ?

thanks Roy

[thinking of a change of colour]

hi

thinking of changing the colour of my 90 which is blue at the moment and i have seen this one

can i do the prep myself and the best method of doing it ,

whats involved ie time, cost, whats needed and the final cost of a respray ?

and most important what is the colour ?

and yes its orange lol

thanks Roy

[Tow bar types]

Hi my son wants a tow bar on his 1986 landrover 90 , wil a 200 or a 300 fit if not what will he need and the part numbers for it

thanks Roy

[Thread size in underside of rear crossmember]

Hi

Try this http://www.numcat.ru/landrover/p/31/52566/

Roy

[Cable clips for rear crossmember]

Hi

Have done a rear crossmember replacement on my 300 tdi 90 I just need the u shaped plastic clips that hold the wiring to the rear crossmember to both sides as I only managed to remove I've intact

Thanks Roy

[crossmember and towbar nuts and bolts]

Thanks for that

bolts purchased now

Roy

[crossmember and towbar nuts and bolts]

hi

going to replace my crossmember on tuesday, so i am just going to cut the towbar bolts and the 2 bolts on either end of the crossmember to tub got the three centre ones undone as they have captive nuts.

so i need sizes of nuts and bolts for the tow bar plate on to rear crossmember x4 / towbar bracing legs from tow bar to chassis x 4 and the 2 that go up into the bottom of the crossmember,

have got new towball with a free bolts from a mate

Thanks Roy

[new rear crossmember weight ?]

hi

found out its just under 25kgs and have got a pricee of £30 cash it will need to have the black spray paint removed first found someone to do it for £15 also he can do any parts that you can get to him he's done a few series 1 and 2 bulkheads in the past

and he will drop it of at the galvanisers on the same day, so all sandblasted and galvanised for £45 a bargain i think ..

i will have it galvanised upto the extensions so no need to grind before welding.

Roy

[new rear crossmember weight ?]

Hi

they want to know its weight cause they charge by the kilo , will grind galvanising off,weld it on then wax oil the inside only galvanising it as I want it to last and I can't afford a full new galvanised chassis at the mo lol

[new rear crossmember weight ?]

hi

going to replace my rear crossmember very soon and want to know how heavy the new one will be as i am going to get it galvanised but they can not give me a price without knowing the weight,

i think it maybe a good investment in the long run.

so does anyone have a rear crossmember with extentions that they can stick on some bathroom scales or had one delivered and have packing with weight on the label and let me know how much it weighs

and yes its a strange request lol lol lol

[will a injector pump from a 200/300tdi disco fit a 200tdi defender]

hi

will a injector pump from a 200/300tdi disco fit a 200tdi defender as a mates is giving up the ghost and he does not have the internet at the moment to search for himself,,

if so is it a straight swap or will it have to be adapted

thanks Roy

[turbo in all of the time]

hi,

popped in to see a friend 0n saturday and whilst going for a spin with him ,i pulled up at some traffic lights and he said he could her the turbo whistling i said he is hearing things but upon checking it out on his drive he was right even on little more than tick over the turbo is merrily whistling away .

so question is this a stuck actuator, if so how do i test it ?

if so can it be freed in situ or will it have to come off and how hard is it to do ?

i am not down on power or getting a lot of smoke.

thanks Roy

[trailer warning light]

hi

towed my trailer today and noticed that the trailer warning light only flashed once with the indicators, but the trailer lights all work as they should is there a relay if so where ?

second thing is i notice that with or without trailer connected if i use the hazzards only the trailer warning light flashes and not the arrows any idea's

thanks Roy

[defender dash clock]

hi

just wondered if LR fitted a square dash clock i think only on the early 90's

is this true as a mate seems to think they did and wants one for his 90

any idea's or maybe a part number

thanks Roy

[pop rivets]

hi

looking for some pop rivets for general use whats the best sizes and type to obtain

thanks Roy

[front bumber mounting bolts and nuts]

hi

going to be changing standard front bumber for a 4"x 2" 3mm box section so expecting the old bolts to snap

so need part numbers for the 2 bolts and the nuts iirc nuts are on a plate together

thanks Roy

[push button door skins]

hi

looking for some new skins for a 200 tdi with push button front doors,

does anyone know where i can buy some from

thanks Roy

[tyres and m.o.t]

Dad 0 - 1 Son

nope 1-1 cause man at the mot said ok but very unsafe practice so son has now put some more at's on

thanks for the info to all that replied

Roy

[tyres and m.o.t]

hi all

i want to settle a argument with my son as to his 90 and his pending mot

he had a set of alloy wheels given to him but 2 are at and 2 are mud and he thinks that they will pass its mot with them on , i think they should all be at or mt not both

thanks Roy

[1995 defender main light switch ( stubby one on the left side of the s]

just checked and mine just has a 3 way block connector not the original, the electrical inline sort for joining wires so it looks like a diy job of some sort

Roy

[1995 defender main light switch ( stubby one on the left side of the s]

hi

my main light switch was in the on position and i came to turn them off and it would not move and lights no longer work, so i think it has melted inside

had a quick look on fleebay but got confused

so i am after the right part number folks

Thanks Roy

[starter motor]

Hi

just a quick question will a starter motor from a 200/300 disco fit a 1991 200tdi as a friend at work has a faulty one

Thanks Roy

[C reg 90 front wipers]

thanks

[C reg 90 front wipers]

Hi

does anyone know the part number for the front wipers on a C reg 90, they are for my sons lr

thanks Roy