ANTOINE

ok, so like this i am good

thanks a lot, to i think my vr sensor is bad, what do you think of this

Morning nige, and what do you think VR ? i think i am bad way on my picture

if i read this, i am not good ??? http://www.autosport...opic.php?t=2373 a peace off advice, please and what wire on 7 edis module ?? this ??

good or not good, i am not sure with the plan ??

ok thanks, i have not read enough again, sorry, now you tell me that, i see better the wiring i will put a plug on the lambda loom, for the moment, i eat the elephant noze ; )

so i begin, but what is for this cable ?? to what is plug for lambda ? in or not the kit, ? thanks

ok, thanks, my wiring must be more short ; )

yeah, ok, so I think i will put it like Mr freeze, because my new plenium is not finish, and I have no more the tube for distributor, the principal, this is it will be on the plenium, ok, thanks, do you confirm the edis ecu can be in the cabine, therefore far the jumo and engine, no problem ?? today, i have washing the replacement engine ( engine only for do the wiring, the real is again in the 90 ), and now in the living room, i will can begin the wiring this week end, tommorown , i will go in the garage to measure the loom and do a copy with one cable, like this i could work near my dear in the living room, yeahhhhhhhh, for the moment it dry near the fire before miss come back at home

thanks a lot MR 1664, I read again, again, and again , one more time, and more I read, more I think I have do the good choise, that's beautifull MS, yeahhhhhhhhhhh (if my engine start) mouarfffffff

ok thank for this answer, i will put as the wiring my injectors, i don't see very well the wiring and i would be sure, I keep my regulator to, this is just for my personnal curiosity i have ask how the return was do on the engine's hoss ; ) for the ECU i think put it on my roof to, and the edis, i don't know yet, because I think i have read edis ecu more near jumo was better ? yes/no ? again, where MAP hose do you start on the engine ?? also, for the moment I have building an another engine in my garage, and when it will be finish, I will put it on my living room, like this i could do my wiring in my house near my wood stove ; ) tommorown I wash it for my wife don't cry when I will tell her , "I put this in the house, this is the winter, my dear, I have cold in the garage"

Hi Hoss, thanks for your answer, I see your edis module, and I have listen the modul can be warm and we must put it near air for freeze it, no ? i have see to, you have a fuel regulator, this is just because thor fuel rail have not and you put it with a standar fuel pump ? so you have modified rail fuel to have a issu ? you have 2.5 bar to in rail, or more, just for info

Hi all, to begin, I am french, and i don't speak very well english, and if you use technical words , abbreviation and joke word, I don't understand, (you can laught at me, so) but the week i have my christmass present, and i will need some help, because i have a lot of question, 1 For , sam i have now the same kit , as you, but without relais card, and i would like to know where do you pick the "MAP Hose – from ECU to Engine 5 Metres" on your engine, if you can made me a good pick, thanks for the moment i read, again and again Nigel's explication, and i am very bad in english 2 Nigel, if i good understand the wiring, i can use 32 for 2 injecteurs only, 33 for 2 to, and the same thing for 34 and 35 ? OR I must put 32 and 33 together and 34 /35 also ? 3 where do youthink i must put my ecu in my 90 ?on the roof or behind the seat ? or another place? 4 where is the better place for edis module ? and i must put it in a box waterproof also i have very very questions, sorry, and when i will finish to read for the 1000ème time my cd, i think begin also a big thanks to Nigel for his patience, and later your, HIAaaaaaaaaaa (soon)

thanks i will try to understand the difference,

can you put a link with mt ,mlv and tunerstudio, just for understand the difference, thanks

thank you very much,

HI, I have buy the same MS, i think, and i will put on my engine this winter, if you can do a final shema, I will be happy i have see to the spare on pin 3 4 5 6 , but i don't know what is it ? for what ?? if i have good understand, you will put 3 4 5 6 on the relais card ? yes / no excuse me for my language , i am french, and all your shema are in english (cheat, why i don"t born in england ?)

a litte cat in the snorckel ? so not air, or a very big mouse ....

great job, i hope do the same works

ok, thank you, nobody know voltage exately , just for the info

Hi, just a question how many volt with EDIS and MS a DUI distributor give 50 000 volt to the coils, so how many edis ?? thanks

ok, thanks a lot

just a last question, he have a tornado cheap, so he must do remapping his tornado ?

thanks a lot

Hi, this is not for my engine, i wait your offer for MS this is for my friend, he have do a twin plenium on his range rover, he have HW no catalist, we have thinking that as he have a twin plenium, the flow of air can be restrted, and when we have see this modification with gems anf trimer, we have thinking taht will be a good solution, so, if i understand good, you think this is not a good solution ? what is the risk ? if he keep the same value ohm between the HW MAF and the trimer, what happenning ? i would like your peace of advise, and if you could, with simple word for not disturb my poor english language, thanks a lot