defender dinky
-
Posts
756 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by defender dinky
-
-
Is this not the same then, dd
-
Just a thought, would it fit if turned upside down, mine are the same shape which ever way you look at them, depending on fitment of course, dd
-
Hi, my n/s slider is closed when moved to the right, o/s closed when pushed to the left, 1988 efi v8, dd
-
its this one
-
Hi all, anyone have a photo or diagram of where the air valve transducer fits, missing a few photos from my project, range rover classic v8 efi 1988, dd
-
OK thks
-
hi all, hope this is ok to put here, if not please feel free to remove it, is it possible to transfer a registration number from a tax and mot exempt vehicle, when I did mine both vehicles had to be mot'ed, but this vehicle is 1978, dd
-
Yes sorted, getting ready to put body back on chassis, thks dd
-
Back again, had all my exhaust parts delivered today, but there's no hangers on it, how do I fit this exhaust, like I said earlier there was no exhaust on it when I bought project, where do I fix mounts and what mounts are they, dd
-
Thks for quick reply, dd
-
hi all, rrc 1989 f reg, efi 3.5 auto, would the exhaust have a catalytic converter on it, has when I bought the project there was no exhaust on it passed the down pipes, dd
-
Yh sorry expanded photo now, but the one I'm after is from brake servo to plenium, plugs in just behind excelerating cables on the left, the one with the red push fit connector,dd
-
Hi western, I can't see item 8 on your link, the search bar is in the way,dd
-
hi all, need part number for, discovery 2 4.0 v8 auto 52 reg, brake booster vacuum line, mine has melted through, and got no brakes, dd
-
All sorted, took it for short run and it changed over as normal, thks, dd
-
Yes tanks almost full, I'll check all hoses tomorrow, take it for a run make sure its not in limp mode, dd
-
The gas switch lights up for gas,but just keeps flashing
-
hi all, just changed head gaskets on my discovery 2 4.0 v8, but now lpg won't switch over, is it because I disconnected the battery for 2 days, dd
-
Do l need to put any adhesive on block before fitting head gasket, like copper grease, dd
-
Do I reuse bolts or new
-
Another photo
-
Update, right mess underneath manifold, also found what looks like a dust cap amongst that mess, presume it fit on photo three, rocker covers no better,why does the block look orangery red, had they put some kind of sealant in oil, also had water in cylinder 6, but all the gasket had oil and water bubbles on them, bought this 2yr ago and was told its just had a full service, ( no paper work thou), now the whinging over, do I need to put new headbolts in, oh forgot to say the manifold bolts were loose two each end were tight others the were loose, can I reuse manifold gasket because there's isn't one in the kit, dd
-
Some photos,
-
hi all, discovery 2 4.0 v8 lpg, 2002, hoping to do head gaskets and others things in there, but first need to remove lpg system from manifold, is it difficult, is there a how to do list anywhere, was going to start it today on the drive, weather suppose to be good, dd
Air valve transducer
in Range Rover Forum
Posted
OK, ebay wrong description, so I need to know where it's location should be, as I lost my project photo's, does it connect to the air expansion ball, dd