boyt

Yes the pumps are rare in this country. EBay German and American see alot more of these pumps Andy

Www.smt.nu very helpful chap. Based in Sweden.

For the people who want to put the om606 in a landrover/rangerover/disco Its quite easy. There is a conversion kit available for about 700 quid. It comes with conversion plate. Engine mounts and exhaust. It's available for Manuel and auto. If you go Manuel you will need a flywheel from a e300td with om603 engine. clutch pressure plate for a mercedes and Mitsubishi friction plate. I have all part numbers. They go on the v8 gearboxes. The turbo has to have the turbo actuator changed from vacuum to boost. Or depending on the hp wanted an holset turbo The fuel pump you need from either a om603 turbo or om606 non turbo both these pumps are mechanical. If you want more power you can have the 6mm elements fitted From the original pump to your mechanical pump. Or even bigger And that's about it to get it running

Thats brilliant. Cheers

Hate the cost and availability of parts. Ive had to. Recon turbo. Recon pump. Headgasket. Water pump. I had the injectors clean and reset up due to part availability. But now there buggered and im awaiting nossels to be made. Should she them by the end of july. And its never impressed me power wise. My 200tdi with tweeked pump and hybrid turbo was quicker

I have a 200tdi discovery with a madza 3.5 slti engine in. Im fed up with the dam engine so was thinking of putting a 300tdi or td5. I like the idea of the td5 but the simpleness of the 300. What power is people getting from the 300 Andy

Hello I need to know the fuel sender wiring colours for a j plate 200 tdi discovery Thanks in advance Andy

Bosch pro for angle grinders. We use and abuse them at work and there the ones that always keep going. Depends on what kind of work your going to do with them. We have a bosch drill aswell and thats lasted 5 years. But dosnt get used much as we use cordless drills. Were snap on drill seems to be the best we found

Orange I believe your in Poole. I'm in Poole to. We have a reconditioner battery charge if you want them put on them Andy

Orange I believe your in Poole. I'm in Poole to. We have a reconditioner battery charge if you want them put on them Andy

Who's had one of these or is there better option. Winch one is a superwinch tiger shark 9500 Winch two tds 8500 goodwinch Winch three is winch it yeti 13000 What's your options Regards Andy

Hello can any one tell me the size of the exhaust pipe on a 3.9 non cat exhaust system Thanks in advance Andy

Do you know the water pump number. Need one of them aswell

Hello I'm after a head gasket for my 3.5 slti lump. Can anyone tell me were I can get one from. I know m a d d engineering sell them but was wondering if there are other options. Motor factors maybe? Cheers Andy

Yes all tested. Needs motor. Cheapest I have found one for is 340. So rethinking on what to do. Trying to find a decent 2nd hand winch but not much around

Bog monster What tyre would you recommend? Andy

Right selling my tyres for something bigger, I have a disco trackback so clearance on the rear is fine just the front, but chopping isn't a problem, thinking of 37" maxxis mudziller, has anyone had these or use these, and what do you use on your disco? Andy

It's the exact set up in the last two links fozsug posted, I've order the gauges and will be here at end next week, does anyone know the leak off value for the motor in a minute? Andy

Last two post is what my winch is doing but they never posted how they fixed it! Doh

After fitting my hydraulic winch to my discovery (what a pain of a job fitting the PTO) it doesn't seem to pull very well at all, if I was winching on tarmac it will pull me fine intill I put my breaks on then it cuts out, I've checked the pressure relief valve, it's set to 2500 psi, awaiting gauge to comform this, spoke to a hydraulic specialist today, he seems to think that's all the winch would pull anyway, has anyone had one and how did they pull, Andy

Just to let people know I now have a 3.5 turbo intercooled Mazda lump ready awaiting me to start fitting it

My 200tdi has a cracked head, so thought it might be good time for an engine conversion, must be diesel, what have people done and recommend, has anyone got a conversion for sale?

Fridge what you after for the pump and motor, when you next at a slrc event? I go to most the play days, Andy

Motor has 3 unions, not pump my bad

Good idea on the gauge, removed the cable today, not seized, the shaft is abit sticky, are the seals for this ready avaible? Ifso will remove the shaft and clean with new seals, will look at getting a gauge, as there is 3 pipes for the pump, one must be pressure relief, but there's no external adjustment?