boyt
-
Posts
128 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by boyt
-
-
service already done last week, oil level ok, anyone done a pump? Cant be that bad,
Andy
-
service already done last week, oil level ok, anyone done a pump? Cant be that bad,
Andy
-
not to bad 171000 any ideas
Andy
-
not to bad 171000 any ideas
Andy
-
not to bad 171000 any ideas
Andy
-
hello i have a 200tdi and 300tdi, if left for four hours or more the 300 oil light will stay on for 3-4secs at start up, were as the 200 goes off strait away, changed oil and filter, changed oil pressure switch, when warmed up its fine, no engine noises, before i rip the engine apart has anyone else had this issue, have ordered a oil pressure gauge as we dont have one at work (only mercedes main dealer!)
Regards
Boyt
-
Andy, I haven't had any emails from our site (they normaly come to me) sorry.
Our permit only allows road legal vehicles.
ok thank you for the reply, vehicle has mot will bring certicate, will bring trade plates with me for tax and insurance,
regards
andy boyt
-
Dorset Land Rover Club ltd are having a driving day on 31st October, open to all makes of 4x4,
There will be onsite catering, and free recovery.
For further details http://www.dorsetrov...rk-open-4x4-day
or reply/pm me...........
Ron.
Hello Ron, emailed the club though your website, no reply yet (only emailed yesterday) it says taxed vehicles, my 4x4 is on a trailer, so not taxed, is there any problem with this, I'm sure I'm not the only one with non taxed vehicle,
regards,
Andy Boyt
-
hello we just brought some snap on 3 ton "beast" as they call it, they are great, 4 pumps and they are fully up!! with a load on them, recommond them to any one
-
paypal sent, added 15 for members ship as mine exp 5 days before! lol form filled and sent by email. cheers
-
hello, who do we send payment to for paypal?
regards
andy boyt
-
it'll be 11/16 unf... but as was answerered on the other thread you posted, this is your steering you're messing around with so is it really recutting a buggered up thread ?
G
like zim said, not worth the chance, i put hd steering arms comes with 4 new ball joints, they were 70 + vat, well worth the money if you ask me
andy
-
Hi all
A mate at work has a problem with his disco, on his way back from a laning trip he stopped at some traffic lights to turn left
Pulled away but couldnt turn left,when travelling at speeds of and above 25 mph all is well,
below that speed he cant turn lerf at all.
Hes disconnected steering, wont turn left
Hes removed diff, all seems ok
Hes removed drive shafts cv joint seem ok
Steering turns left until you fit drive shaft then locks up
Any ideas?
if you cant turn when your at standstill with the two short shafts in sounds like cv joints, when you say disconnected steering what do you mean? and were disconnected? make sure your steering damper isnt full of mud this can cause this sort of problem.
regards
andy
-
Looking forward to it!
hoping to be there with the updated new discovery
andy
-
I should learn to read better, you already said the solenoids are single pole (2 large, 2 small terminals).
Does the motor have 2,3 or 4 terminals?
3 i beleve, cheers for the help
andy
-
hello i have 4 relays each with 2 large connectors and 2 small connectors
regards
andy
-
hello brought a husky 8500 pull, with 4 relays/solinds, has any one got a wiring diagram for this, would be very help full
regards
andy
-
my vote goes to snap on, very good, undoes my discovery wheel nuts no problems, did have a battery die after 18 months, but got a new one under warrenty. also the drill to go with it is very good.
regards
andy
-
please vote, comments welcome
-
hello looking at replacing my tyres,
what sizes are people running?
thinking of running somethink bigger than the 265 70 16 im running now,
cheers for your thoughts
andy
-
hello nige, can get you a price from my work, we buy it by the barrel loads!!!! rear diff in a merc truck holds about 19 litres then some an extra 3 litres in each wheel hub!! and we have ep80, and atf should be able to supply it by 20 litres, then exchange oil for money at the shires meets, mannington is coming up soon i think
regards
andy
-
Snap on mg725 1613nm of torque, on offer at mo as well,
andy
-
Where did you get the edge stripping from?
Dave
i think he got it from a shop dave, do you want some, think there is some in the workshop, the new vitos come with it around the bulkhead.
let me know, im up your way tomorrow
andy
-
I'm at work and havent a size chart with me so I don't know if they go big enough, but the best tool I have used for holes up to 1.5mm steel and 2mm ali are Q-Max punches. Just drill a hole to suit the allen screw, then use the punch and you get a super burr-free hole. Do a search for them on Google.
must agree with above q-max punches are very good. holes saw would be top of my list to use, just because i have some, any one in poole area are welcome to use them.
andy
300tdi oil light
in Discovery Forum
Posted
any one got correct pressure for warm engine at idle?
Regards