biggles

Why are you worried about speed ratings? Are you looking for a competition tyre or pay and play come road tyre? Belive you also mentioned something about rocks, why not look at maxxis creepy's , tho think min width is 12.5

Yep +2" and 5.5 inches of travel on the ome shocks, or whatever other shocks you want, what i use, does what it says on the tin, prob about the best and easyist set ups going, unless you got loads a money to throw at a suspension set up, and a real nice guy to talk to about suspension set up's (not just his own) or anything else regarding defenders for that matter

Thanks for reply Andy, no not warped, ive done quite a few mods to the engine and thought while im at it i may as well change the studs, just posted to see if any one had fitted them. If you was thinking of parting with them let me know, as i would be interested,do they have the spacers etc? Steve

Has anyone fitted the JE engineering uprated manifold studs on a TD5 defender? or does anyone know if it is worth doing? thanks

I just got rakeway to sort me out a panhard rod for a post 02 defender, great guys and service, quite a good price as well.

Ordered one from David at llama today, great guy, very helpful. As I had a sumo bar and a disco drop arm from Gwyn already on the defender ordered one of Gwyns drop arm mounts with the kit from David.

Does anyone have a pic of the llama hydro assist set up they could post? or let me know how it is fitted at the drop arm end? many thanks

Thanks for all help, I emailed lodar and just got reply, which I thought was pretty good as it's a Sunday, basically what si has said is what I've been told by the tech guy at lodar even down to Albright amp ratings. Thanks again Biggles

Thanks for reply, looked on lodar's site but still can't seem to find out which unit can operate two solenoids, prob drop them an email biggles

I Was looking to get a Lodar remote, could anyone tell me which would be the best model to go for to control a twin motor 8274 motors are xp's solenoids albright. thanks for a ny help

The ones i used were (In old money) American bolt size SAE (unc) 7/16-14(thread pitch) x 1- 3/4" about 50p each or quid if you want posh cap head allan jobby's rgds

Hi, does anyone know if Mudsport near Sittingbourne are still going? ive been trying to get hold of them all week with no joy. thanks

Thanks for reply Steve, i even had a word with safety devices to see if they did anything as they supplied my cage, but no they don't, think provided spreader plates are of a big enough size and harness mounts to fia type ring bolts can't see a problem, as i said in original post angle from seat box to seat is approx 45 deg so should be ok

What is the best way to fit a four point harness in a 90 hardtop? can't mount to cage as its safety devices external, so no cross brace, ive worked out that the angle from top of seat boxes to seat back is 45 deg so angle is ok, but would it be ok to mount fia type ring bolts with plates to top of seat box on each side or make harness bar with four point mounting each side of seat boxes or in the event of accident whole lot will just rip through floor. thanks biggles

Hi, as title looking for company who make post 2002 adjustable panhard rods its the straight one with i belive 14mm fittings, ive emailed rakeway but had no reply, duno of anyone else thanks biggles

Thought it was 24/7 I'm in there tomorrow afternoon will ask at the fso

Bit late i know, but yes they are belive 24/7