dasterdly
Settled In-
Posts
96 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by dasterdly
-
evening, what are the differances with the bulkhead outriggers on a airportable, compared to a standard series 3 chassis ? cheers...
-
evening, having decieded to start work on rebuilding the airportable, the chassis is the fist item to be sorted, i have ordered a military 1/2 chassis, but whilst chatting to a fellow landrover owner, he thought that there was a differance with the Front Legs and Crossmember Assembly (repair section) he seems to think that the repair section differs for the airportable than the standard non miliary series 3 swb, in that the profiles are differant and thicker ? can anybody shed any light on this subject before i order said part. the front chassis legs on my chassis are knackered,and the front crossmember needs attention, so thought i would be easier to replace as a whole unit. paddocks have the part mentioned, but no specific mention of military fitment. cheers...
-
evening, the two relays you refer to are the horn relay and the stop light relay, the one nearest the engine is the horn relay. this information is for a 24volt series 3 petrol airportable. if the relay nearest the engine is broken, then i assume the horn wouldnt work ? cheers...
-
evening, dont think there is a specific headlamp relay for a 24 volt system.. maybe its the infa-red headlamp relay part number you need ? cheers...
-
hello, anybody got an epc for my 1991 200 tdi defender..please :-) cheers...
-
hello, the usual suspects should have the mil bumpers in stock, paddocks,craddocks,dingocroft etc, expect to pay around £60 for one.. cheers...
-
hello, i have asked this question some time ago,but here goes... does anybody know where i can purchase a set from ? i contacted paddocks who used to sell them, but dont anymore ! Grrr.. i dont wont the wolf ones, as the heads are differant although, i have a britpart number (da4406), but thats for a complete kit, at around £60 but i only require the mirror arms cheers...
-
hello, what exactly is your defination of " wolf doors " ? i bought new series 3 door bottoms,and fitted the early 90/110/military ally door tops. i then fitted the normal lift up handle lock, and slam striker, some people prefer the anti burst locks and striker. i chose the series type slam striker simply because i was always hooking myself on the normal defender striker, which sticks out. cheers...
-
hello, no problem, i recieved the full mounting kit yesterday from craddocks, so it seems they do have them in stock !! £35+vat+£6 p&p cheers...
-
hello, after a couple of weeks of trying to get some information, i have the defender atu mounting kit part number : RTC5948 Dingocroft could supply one for around £60, on contacting somebody differant at craddocks, they assure me that they DO actually have them in stock, and are supposed to be sending me one ! if it dosnt arrive next week, i shall have them off you, providing you still have them ! i will post a reply next week. thanks for all the replys and help. cheers...
-
hello, its going to be fitted to my defender, as opposed to the lightweight..which needs..erm..rebuilding ! :-) cheers...
-
cheers ralph... :-)
-
hello jim, the part numbers i have are as follows: PRC 3761 nut plate x2 RRC 3763 support angle x2 RRC 3764 gusset support x1 RRC 3216 mounting bracket A.T.U R/H RRC 3740 reinforcement A.T.U R/H i think there are also a couple of other bits and peices, to complete the mounting kit, but the above should be most of what i need...hopefully :-) cheers...
-
hello ralph, i emailed him,via the email address you sent me, but had no reply as yet. i have managed to find some part numbers, but not to sure whether the units will fit my ATU, as they are pre defender. i am 90% sure they will but just need some confirmation, then comes the job of aquiring some :-) Cheers...
-
hello, having found out that the ATU mounts within the cable box on the front wings of ffr landrovers, does anybody have any part numbers ? cheers...
-
cheers for the info, what are the small square shaped boxes on the front wings of alot of ffr's defenders/xd's, i am assuming that they are mounting kits ? or simply cable boxes cheers...
-
hello, does anybody have a close up picture of the ATU mounting kits ? Craddocks had them advertised on their website, but on contacting them, they havnt got any ! my ATU came with a single bolt that goes through the wing and connects to the bottom of the case, but far to flimsy it would seem. maybe the little boxes i have seen on the front wings on various defenders/xd's are where the atu sits bolted through ? cheers...
-
hello, i have a chassis, which stevie wonder welded, must be a series thing ! :-) cheers...
-
hello, i fitted an electric fan to my defender, the donor vehicle was a 1.9 citreon turbo, it has two fans fitted on a large radiator. i simply fitted a seperate switch to turn it on and off when needed, but apart from pulling up the pyrenees fully loaded in august,i havnt really used it. i cant comment on how hot the airportable will get, as most of mine is in peices strewn around the garage ! cheers...
-
hello, well, i checked out the vin website, and it is indeed a petrol engine, so everything checks out. now all i need are a few simple items..chassis..bulkhead, doors..etc etc ! thanks for the info. cheers...
-
hello, i have just purchased another land rover, this time a series 3 109. however on the log book its classed as a " motor caravan " is this normal, it also states thats its a historic vehicle, it has 12 seats so i am presuming its a station wagon ? it has a 2286 petrol engine in it, but i was told that they originally had diesel engines fitted ? the year of manufactor is 1972 and its tax exempt. can anybody help with the above points ? cheers...
-
hello, i have emailed EMLRA to see what i need, but if anybody has some bits and peices they wish to flog me, please get in touch. cheers...
-
hello, could somebody tell me what parts i need to equip the defender with a wing mounted military whip aerial ? i know there is a box that the aerial mounts to, but dont know what its called etc, any part numbers would be helpful, and approx cost for a complete setup ( minus the radio bit !) cheers...
-
hello, how much longer are the 101 fc arms compared to the standard defender ones ? cheers...