Ian M
-
Posts
231 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Ian M
-
-
Any ideas on the venue's yet?
-
Does anyone know the spec of the springs that the special vehicle 110's had, like the likes of the electricty board etc? i know they used to fit the 130 helper springs on the rear?
-
Just had a shower and just about dried out and warmed up!
Cracking result for us, 1st in class 3, and clinching 1st for class 3 overall for the season.
Got to say a massive thanks to Bob for giving me the opportunity to co drive the season, weve had some highs and lows like everyone, but 7 podiums from 8 rounds, three 1st's, two 2nd's, two 3rds's and a 4th is good going, learnt alot this year being on the other/outer side. Its been tough going in class 3 with one winch, but definitely worth it! Thanks Bob.
On the other side, massive thanks to Neil and the team for the whole season, aswell as the sponsors!
Tom took about 170 pics today, so il post them up when ive sorted through them!
Ian
-
don't know why they are in high demand, i don't like the big bulge at all, I'm sure LR designers could have done a much better job.
feel for your buddy though, not a cheap part to replace & I don't think a earlier bonnet would fit
a td5 bonnet will fit apparently! but there is no squash area between it and the top of the engine, if you hit someone and they land on the bonnet. thats was the need for the bulge apparently!
-
i heard tom salt had a cracking result for the first time out, in his fresh out of our workshop truck!
-
hi si,
when i spoke to mark woodward the other day regarding trade stands, he said go onto http://www.lrsouthwest.co.uk/ to download the forms.
Ian
West Mids 4x4
-
we will be there for the weekend!
Ian
West Mids 4x4
-
is there anything common before i get involved?
basically the rear door stopped opening, and the rear window wont go down on the dash button, after a few days it all started again, but has now stopped, as before the rear door wont open, and the rear window wont work off the dash button, however the rear wiper works.
anyone had this?
Ian
-
whats the site like?
-
does anyone know if the flywheel from the v8 3.9 auto is the same a 300tdi auto?
and also if the bell housing mounting holes are the same?
Ian
-
im looking at buying the above,
now ive seen one that bert has, oven shaped, on 3 legs, chimney, door on the side of the oven, swiveling hot plate on the top. not sure where he had it from?
can anyone else recommend one? or got one?
Ian
-
Anyone out there fancy entering their vehicle? we are currently a vehicle short in team lr4x4 / crag! car can be std or modified! pm me or treebloke.
Ian
-
Anyone out there fancy entering their vehicle? we are currently a vehicle short in team lr4x4 / crag! car can be std or modified! pm me or treebloke.
Ian
-
So If i have Front and Rear winches And No Lockers That wouldnt let me go into Class 2 Would it? Id have to go in Class 3 And not use the rear winch Wouldnt i?
Jay
you could go in class 2 with front and rear winches, but you would be at a disadvantage to others in your class!
-
3 . 5 ton is the max
-
cracking event for us! 1st in class 3! and 4th overall with 1 winch and no lockers is unbelievable! class 3 overall is hotting up no, so close to call yet. cant wait until the next event.
i know the decent your on about neil, that was mega close to rolly polly, not sure how it stayed upright, the one last fedima's on the floor must of been glued down in the mud.
Ian
-
we used the use ASD, but have had loads of problems with them, not having stuff in stock, and also their communication is poor, we used to ask eveytime for our number to be put on the delivery sheet so the driver cud find us, but it never is and the driver spends half an hour driving around the estate. We use a local steel stockist now.
-
cracking event for us, rolling in 1st in class 3, looking forward to round 5 already!
-
not to far for us, probably the closest round!
-
does anyone know where the rev counter gets its feed from on a 3.5 v8 efi, compared to a 3.5 v8 carb model?
Ian
-
i saw him bob, it was the punch we waited for team gunit to come out of in that little gulley, it climbed up abit, flatened out, then went up again!
-
Was a good day for us, 3rd in class 3, shame we lost a good hour stuck on a punch that we didnt even get, good site, but very hard on the co drivers, looking forward to corwen already!
Ian
-
rear drum brakes out of adjustment?
-
i have been offered an early 110 that needs this cross member replacing! can it not be replaced with a length of box section?
what does the land owner get?
in Competing in Land Rovers
Posted
i would guess BIG £'s