Young bobtail Rhys
-
Posts
663 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Young bobtail Rhys
-
-
its fine with me matey, thread jack away.
i dont think them being 11.5" wide will alter the hight, but i dont know if fedima or silverstone do any 11.5" wide tyre. but like me if its for a spare anything 35" dia and close will do, id just prefer a similar tread pattern.
Cheers Buddy,
I don't mind whether they are 10.5 or 11.5 wide really, as long as they are the same height then because it is a spare it doesn't really matter too much. All I know is that my 35/11.5 16 et2's are 35" tall at 18psi on an 8" wide rim
-
I would also be interested in Tim's thread as I require a 35" simex or similar, although mine are 11.5" wide? That doesn't make them any taller than the 10.5" for some stupid reason does it?
Sorry for a little hi-jack Tim
-
I don't have any problems with the guards trapping mud. I get right underneath my rr with the pressure washer and everywhere seems to be accessable, even down the back of the diff guards
-
The scorpion ones that I have fit very well, and TBH if mine was to come off, then my axle would sustain quite alot of damage I would think! However, there are others out there that don't fit very tight, like Rebel. My dad has some on his 90, tightened up all the same as mine, but has spun around on the diff pan.
-
Just a decent wrap around type on the pan.
-
I have some scrapion ones and.............they are good, very good. Life time guarantee and galvanised. I think they are something like 6mm steel all round. However, if you buy from scorpion (which I didn't) you have to pay around £50, per guard, and even though they are very good, thats too much!
-
Here is a friend of mine challenge range rover that he has shortened to 88" http://www.brunelperformance.com/grumpystoy.htm
-
Or..........these
-
yep I have them, and they are fantastic. Not one of the wheels leak air. Although, if I was to buy again, purely for the price I would buy from Gary and just inform him that you want 32 bolt holes. And possibly? get a fibre belt (fan belt) that fits perfectly around the inside of the locker. That is a great thing about the bt fab ones as it comes as standard and stops the mud and grime getting down on the threads and stops the bolt heads pulling on one edge, which then spreads the pressure around the tyre bead a little better.
If you do need any info, like Rich said, drop us a pm
-
Ok cheers Gary
I will bear that in mind
-
Just to let you all know
Problem solved! I have bought some simex to put on my old beadlock rims
-
And also with an 8" rim the offset is just about right so the tyres shouldn't rub, but the 10" rim would cause more problems as it's huge offset would cause the tyre to rub more.
HTH
-
I have fitted a 32/11.5 bff goodrich tyre to a 10x15 beadlock rim and it looked fine. The sidewalls were completely flush with the rim but it looked fine. I would still recommend an 8" to 8.5" rim however. This is what mine looked like,
-
Yes it would work as a 285 works out as around 11.5", however it would probably look as if the rim is too wide for that width tyre, so you would be best suited with an 8" to 8.5" rim.
HTH
-
If you want a really, really soft setup.......then go for a set of soft springs, i.e. scorpion and rough country shocks. This is what I have and to be perfectly honest, it is a bit too soft for me. Once you start going over 20mph on rough ground it can get a bounce going, so there might not be enough damping here.
-
I have bought products from gwyn and will keep buying products from gwyn. Gwyn and his service is superb, and best of all friendly. I will probably be purchasing some props and possibly some old man emu dampers to upgrade my kit very shortly
-
I have got some slightly sifter springs on the back of my rangie now and all that it seems to be doing is launching the back end up faster and not letting the damper do its proper job. A set of old man emu's are looking like my next option and unlike you Nige, I don't compete so there isn't so much worrying here about the perfect setup for my off road larking about. I leave my real suspension complications to my motocross..........
-
Yep there's always one on here.............
I was thinking along that line. get 4 mods, cut out the centres, move them back to get my 3.5" backspacing and then weld on some beadlocks to give me the 8" or 8.5" width rim, providing I use a 7x15" wheel to start with. The only problem with that is I keep having to ask a mate of mine to do it all for me as I do not have a welder!
I shall put a welder on my christmas list.........
-
Yep, great idea. Could have done that if they were not alloy!!!!
-
Just thinking though, I have a bobtailed rangie with no seats in the back etc. Does this mean like a 90, that it will be hard to balance in terms of damping?
-
Thanks Dave, although I used to have a set of 10" rockathons with little backspacing and with the small lift I have got they rubbed like crazy! The rims were just too wide as I haven't got a body lift. I don't want to lift it up anymore as it is really stable when I get the suspension sorted! I need an 8" to 8.5" rim with 3.5" backspacing, then the tyres do not rub even on full articulation.
-
Nige, I have exactly the same problem as you.
I am using the rough country's and on the slow stuff they are great, flex really well and allow good traction to the wheels. However, as soon as the speed increases they can get a bit of a bonuce on and the car feels very unstable. It will also, wallow alot and bottom out.
Personally, I think it must be down to the angle that in rear dampers are at, as the front is perfect, soft but firm enough if that makes sense!?!
I am thinking of going down the old man emu route atm, although I would like to know the verdict or outcome of this discusion.
-
yep bulge quite a bit, but as I said they were only to see whether that size tyre would work with only 70mm of spring lift, and the gwyn lewis challenge kit.............and it does, really well with no rubbing etc. I need some wider wheels now, and preferably with beadlocks!
-
I already have them on the car with wheels, however the wheels where just used to test the tyres to see if they would not rub too much, and they don't. The wheels are 7" wide, which is just too narrow on a 13.5" wide tyre!
Exhaust low down
in Defender Forum (1983 - 2016)
Posted
I have janspeed manifolds, rimmer bros straight through stainless centre box, and a rear section of 2 1/4" stainless made by a14 exhausts. This systems flows very well. Very free revving, upto 5500rpm no problem, no bad noises, nothing. It is also pretty quite really, but does bark out a little when over 4000rpm. This whole system cost me just £185. A cheap system can be made by shopping around at second hand bits (although only my manifolds and y-piece was second hand) and look around at land rover shows and haggle with them. Very happy the way mine is now