reb78 Posted February 3, 2020 Share Posted February 3, 2020 Folks, I bought a repaired bulkhead from a member on here that I have subsequently had galvanised. I had it shot blasted first, but there are some areas where there was clearly some seam sealer that the shot blasting didnt manage to remove. I plan to pull this out. Is there anything I can spray this with now to compliment the galv coating and give it the best chance at not rusting? I plan to then prep and paint it - I will have a go at doing this myself. My workshed is large enough that I plan to build an enclosed spraying area within it that will fit the vehicle if need be. I will then fill the inside with as much waxoyl as i can get in it to give it extra internal protection. Can folks pick holes in the above so I can improve it? Is waxoyl still what people will use or are there better products now? Quote Link to comment Share on other sites More sharing options...
daveturnbull Posted February 3, 2020 Share Posted February 3, 2020 Cold Galvanising Spray other brands are available Quote Link to comment Share on other sites More sharing options...
Gazzar Posted February 6, 2020 Share Posted February 6, 2020 You could use zg90. Silver. It's good to top up galv, I used it on the trailer, when I welded extra rope hooks. I'd try a more modern wax, though. May be bilt hambler? Dinitrol. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.