soutie Posted April 19, 2021 Share Posted April 19, 2021 I am replacing all my 110 door skins with galvanised ones after repairing the frames. What tools would you recommend? The Seally door folding tool or just a set of hammers and dollies? Quote Link to comment Share on other sites More sharing options...
ballcock Posted April 19, 2021 Share Posted April 19, 2021 I used a hammer and dolly, then a "G" clamp with wooden blocks but mine were ally. Quote Link to comment Share on other sites More sharing options...
JeffR Posted May 2, 2021 Share Posted May 2, 2021 Hammer and dolly every time. I bought a Powertec door skinning hammer , really nice bit of kit (till you lose it in the garden and it gets rusty - nowt a wee bit of wet n dry won't cure). At the garage we had a really need air powered skinning tool, bet it never "crimped" the flanges tight enough for me Quote Link to comment Share on other sites More sharing options...
soutie Posted May 3, 2021 Author Share Posted May 3, 2021 (edited) Thanks for the replies. Once they have been welded I will post up pictures of what works for me. Edited May 3, 2021 by soutie Photo the wrong way round 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.