Rustyv8 Posted September 24, 2022 Share Posted September 24, 2022 Hi guys, it’s probably a very simple answer to this but asking anyway. The holes on my fusebox panel don’t have any receiving nut of any kind (I.e where the retaining thumb screws hold the plastic panel on). Looking at the back of the panel itself it doesn’t look like there ever was anything there either. is there something I’m missing or do I just need to stick in 2 M5 rivnuts? Quote Link to comment Share on other sites More sharing options...
western Posted September 24, 2022 Share Posted September 24, 2022 Sounds like the nuts have come off, IIRC they were or are square nuts just spot welded in place, just add some rivnuts of the correct thread size. Quote Link to comment Share on other sites More sharing options...
Rustyv8 Posted September 24, 2022 Author Share Posted September 24, 2022 Thanks Weatern….. 2 m5 rivnuts now in place 👍 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.