Paddy_SP Posted December 13, 2022 Share Posted December 13, 2022 I've been loaned a D2 while my mate is off abroad - one of the things he never managed to sort out with it is that the dash symbol for the ride height comes on randomly (the yellow one with the up and down arrows), despite the fact that the air system was ditched sometime ago when it was reverted to proper springs. I'd like to fix the problem, so was wondering if this is a known issue, and if so, whether there's an easy solution, such as pulling a fuse? I don't know anything about these new-fangled Td5 jobbies... As ever, any help would be much appreciated! Quote Link to comment Share on other sites More sharing options...
bear Posted December 13, 2022 Share Posted December 13, 2022 Hi, Has the SLABS been programmed and set to coils. I suspect it's still on the air setting. You'll need Nanocom/ Hawkey or similar. Griff (Too far away to help) Quote Link to comment Share on other sites More sharing options...
Paddy_SP Posted December 14, 2022 Author Share Posted December 14, 2022 (edited) That's a good question - I'll see if he knows what was done to his truck when he did the conversion! Edited December 14, 2022 by Paddy_SP Quote Link to comment Share on other sites More sharing options...
Paddy_SP Posted December 15, 2022 Author Share Posted December 15, 2022 I've now heard back - the settings haven't been changed, so I clearly need someone in Devon who has a Nanocom to switch the relevant value. Any suggestions? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.