spcollins Posted March 21, 2007 Share Posted March 21, 2007 I am contemplating buying a new Galvanised Chassis from either Designa Chassis or Richards, and was wondering which chassis (2.5D, 200TDI, 300TDi, etc?)would have mounts that would be suitable for use with a V8 engine and auto box, if any? Any experience using these companies? Any other suggestions? All help much appreciated Quote Link to comment Share on other sites More sharing options...
Harald Hansen Posted March 21, 2007 Share Posted March 21, 2007 Can't they tailor a chassis for you? Too expensive? Quote Link to comment Share on other sites More sharing options...
Mark90 Posted March 21, 2007 Share Posted March 21, 2007 Erm a V8 one would be best. I'm sure they could do this for you. Doesn't matter if fitting a manual or auto box the engine mounts and holes in the chassis for the gearbox mounts are in the same place, just the gearbox mounts you bolt on differ. Quote Link to comment Share on other sites More sharing options...
spcollins Posted March 21, 2007 Author Share Posted March 21, 2007 Thanks guys! I didn't realise the gearbox mounts would be in the correct position as standard for an auto. Which supplier is best? Quote Link to comment Share on other sites More sharing options...
white90 Posted March 21, 2007 Share Posted March 21, 2007 Richards Hands down far superior finishing etc Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.