fisha Posted April 25, 2007 Share Posted April 25, 2007 The saga of P38 bushes continues. The ones i have bought have got holes in them . . . do the holes go vertically as pictured or horizontally? Quote Link to comment Share on other sites More sharing options...
bishbosh Posted April 25, 2007 Share Posted April 25, 2007 I would guess vertical to improve flex in the bush when the axle articulates whilst remaining stiff fore to aft for axle location. Quote Link to comment Share on other sites More sharing options...
western Posted April 25, 2007 Share Posted April 25, 2007 My RAVE cd's just says 'fit the bushes' it doesn't mention anything about the voids [holes] alignment -- this applies to front radius arms & front & rear panhard rod & rear trailing arms. Quote Link to comment Share on other sites More sharing options...
wailofthesnail Posted April 25, 2007 Share Posted April 25, 2007 I'd say top and bottom as well, just like the void bushes we use on the challenge trucks. Quote Link to comment Share on other sites More sharing options...
rick Posted April 25, 2007 Share Posted April 25, 2007 the Haultech 'holey' bushes we use on the front radius arms have the holes top and bottom for flex, just like in your piccy. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.