SIII 109 Axles / Wolf Wheels ???

[XtremeMarineInc]

Has anyone fit the Wolf wheels to SIII 109 axles, with the stock SIII wheel lugs? I am thinking of using Wolf wheels as a base to build beadlocks, and need to know if there are any fitment / clearance issues.

Thanks.

[Gazzar]

The steel wolf rims fit, but the turn stops on the front axle may need adjusting.

The rims are wider than stock, and the offset is different, I think.

You may need spacers, and you may also need longer wheel studs.

G.

[XtremeMarineInc]

The steel wolf rims fit, but the turn stops on the front axle may need adjusting.

The rims are wider than stock, and the offset is different, I think.

You may need spacers, and you may also need longer wheel studs.

G.

Thanks, G. ppreciate it. I don't mind spacers. I figure if DI steelies can fit under a SIII, then the wolfs probably have the same offset. Whereas DI steelies, look tucked in; these should not, as the beadlock adds 1-2" of width to the outside. I am more worried about how much it will affect any turning, so I will address steering stops later. Thanks again.

[PaulMc]

The steel wolf rims fit, but the turn stops on the front axle may need adjusting.

The rims are wider than stock, and the offset is different, I think.

You may need spacers, and you may also need longer wheel studs.

G.

I'm selling a full set of 20 Zeus Engineering Extended Wheel Studs on eBay at the moment -

Zeus Extended Wheel Studs - Wolf Wheels - Full Set 20

Paul.