Warthog Posted September 2, 2008 Share Posted September 2, 2008 Could anyone tell me if the standard splined shaft on most warn winches will fit the Warn TI? I have a friend that has killed his TI motor and is looking for a cheap alternative. I have suggested that maybe the champion 6.5Hp for £95 could be worth considering? Cheers for any advice Mark Quote Link to comment Share on other sites More sharing options...
istruggle2gate11 Posted September 2, 2008 Share Posted September 2, 2008 Could anyone tell me if the standard splined shaft on most warn winches will fit the Warn TI?I have a friend that has killed his TI motor and is looking for a cheap alternative. I have suggested that maybe the champion 6.5Hp for £95 could be worth considering? Cheers for any advice Mark Hi Mate, I cant advise on the fitting to the warn Ti, but Ive just bought one of the champion 6.5hp's first impressions are very good (managed to snap two brand new wires at the weekend!), hopefully it will stand the test of time? The fitment of the champion is exactly right for the 8274, the only difference being a location tab is mising from the bottom of the motor to the winch casing. One very slight annoyance, the pole connectors on the motor are slightly different, rather than the 3 powers on top and earth underneath, the champion has two on top (f1 and f2) with third power and earth on the underside, had to do a little re-routing of the bedded in wiring. [assume its for JJ?] Quote Link to comment Share on other sites More sharing options...
Warthog Posted September 2, 2008 Author Share Posted September 2, 2008 [assume its for JJ?] Yep, he is looking for something cheap to chuck on the winch for this weekend coming. JJ reckons that the splines are different to the standard warns? Just doing a bit of research to hopefully get him a cheap motor. Quote Link to comment Share on other sites More sharing options...
Young bobtail Rhys Posted September 2, 2008 Share Posted September 2, 2008 Don't think any other motor will fit the TI Mark apart from the warn TI motor! Look here Quote Link to comment Share on other sites More sharing options...
Warthog Posted September 2, 2008 Author Share Posted September 2, 2008 Don't think any other motor will fit the TI Mark apart from the warn TI motor! Look here Cheers matey, Thats carp aint it I guess they cost an arm and leg too Quote Link to comment Share on other sites More sharing options...
Young bobtail Rhys Posted September 2, 2008 Share Posted September 2, 2008 ummmmmmm..........don't know. I wouldn't have thought so though, but more than your 95 quid jobby Quote Link to comment Share on other sites More sharing options...
istruggle2gate11 Posted September 2, 2008 Share Posted September 2, 2008 Cheers matey,Thats carp aint it I guess they cost an arm and leg too Talking to JJ and Derek from LRS off road at the weekend, Derek mentioned in the area of £320!!!! Quote Link to comment Share on other sites More sharing options...
Phantom Posted September 2, 2008 Share Posted September 2, 2008 Talking to JJ and Derek from LRS off road at the weekend, Derek mentioned in the area of £320!!!! The Bosch motor which is unique to the Warn’s Ti and HS winch’s is expensive but I have found them for just over £200 ( If I recall Devon 4x4 and Arbils sell them ). Quote Link to comment Share on other sites More sharing options...
davidlandy Posted September 2, 2008 Share Posted September 2, 2008 XP motors dont fit Ti's My Ti motor went pearshaped and I got another from Devon4x4. At first they sent an XP motor, i offered it up to fit and its no good sadly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.