stuntman Posted January 19, 2009 Share Posted January 19, 2009 Hello one and all, I have picked up a rolling chassis and bulkhead, with engine and box. I have the vin but no reg number or paperwork. Can someone please help my decode if this vin goes with this vehicle. I have SALLBCMH2BA315*** (I've left the last 3 digits off) - I've bought it all with a load of series panels that I'm not sure go with it or not. I will contact the dvla when I get a chance but I thought someone on here may be able to shed some light on decoding the vin. Regards Andi Quote Link to comment Share on other sites More sharing options...
western Posted January 19, 2009 Share Posted January 19, 2009 Find Madcowz profile, in his website link there's a VIN decoder drop yours in there & it'll tell you the original vehicle. Quote Link to comment Share on other sites More sharing options...
sotal Posted January 19, 2009 Share Posted January 19, 2009 SAL = Land Rover LB = Model: Series III (for early models: Stage One) C = 109 (LWB) M = 4 door Station Wagon H = 2.25 petrol 2 = Left Hand Drive 4 speed manual B = 1979 - 1987 A = Built in Solihull UK Most likely a 1979 - 1987 Series 3 County Station Wagon, LWB, Left Hand Drive with a 2.25 petrol engine Quote Link to comment Share on other sites More sharing options...
Madcowz Posted January 19, 2009 Share Posted January 19, 2009 Just repeating what Sotal said: Your VIN decoded /mad Quote Link to comment Share on other sites More sharing options...
stuntman Posted January 19, 2009 Author Share Posted January 19, 2009 B*gger, that means I've bought yet another resto project with no id! Thanks for that chaps Quote Link to comment Share on other sites More sharing options...
sotal Posted January 19, 2009 Share Posted January 19, 2009 Why? DVLA might still be able to tell you your reg from the VIN if you are lucky? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.