Darren Roberts Posted February 13, 2009 Share Posted February 13, 2009 Hi, I'm planning on welding some additional brackets onto the rear axle of my Rangie (24 spline ABS approx. 1998, so metric) in a similar vane to the Devon 4x4 Trayback to ensure the brakelines don't come un-attached. Does anyone have any idea how thick the casings are? I have a 150 amp MIG with 6 settings so any help on settings appreciated. cheers Darren Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted February 13, 2009 Share Posted February 13, 2009 The tubes are reasonably thick, but the pans are thin being pressed so go easy in that area. Nige Quote Link to comment Share on other sites More sharing options...
Darren Roberts Posted February 17, 2009 Author Share Posted February 17, 2009 cheers Nige - I'll start with the low power settings on the Mig ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.