mrtod Posted February 18, 2009 Share Posted February 18, 2009 Hi all - I am relatively new to the forum so I hope this post goes to the right place and looks like it should etc - please forgive me if it does not I have just got hold of a NAS style rear step (I believe the part number to be STC50301 - for a 110) Unfortunately I should have got STC50269AA which is the equivalent 90 part. I think the two steps are identical apart from the fixing bars which run from the underneath of the step to the chassis rails. So my question is - does anyone know the part numbers and /or where I can get the appropriate bits? Thanks in advance Tod Quote Link to comment Share on other sites More sharing options...
dantd5 Posted February 18, 2009 Share Posted February 18, 2009 I am sure Ralph-aka- Western will show up shortly and the reply will follow! Quote Link to comment Share on other sites More sharing options...
Dinkydave Posted February 20, 2009 Share Posted February 20, 2009 Watchya Tod Do you mean these bits? They attach the rear step to the chassis? I don't think they're an essential part unless you intend to tow anything. I the step is just for a bit of bling then you won't need them as the other 4 bolts should do the trick. Ade Quote Link to comment Share on other sites More sharing options...
western Posted February 20, 2009 Share Posted February 20, 2009 I am sure Ralph-aka- Western will show up shortly and the reply will follow! Microcat only shows/list the full assembly, it doesn't list the bracing bars as seperate parts, it maybe possible to make a pair to fit. or be sneaky & go nick DD's while he's not looking Quote Link to comment Share on other sites More sharing options...
Dinkydave Posted February 20, 2009 Share Posted February 20, 2009 Lol!! I've been fighting with rusted on bolts all afternoon so I could fit mine. Got'em on in the end though (with the aid of my trusty grinder) Quote Link to comment Share on other sites More sharing options...
GL88 Posted February 20, 2009 Share Posted February 20, 2009 The steps are manufactured by Breed Group in Luton. Google will find them and they sell stuff direct if you ask them nicely. Quote Link to comment Share on other sites More sharing options...
western Posted February 20, 2009 Share Posted February 20, 2009 http://www.breedgroup.com/prod-automotive.htm & contact info here Quote Link to comment Share on other sites More sharing options...
mrtod Posted February 21, 2009 Author Share Posted February 21, 2009 Hi everyone, thanks for the replies. Yes the bars pictured by Dinkydave are the ones I have - it apears they are the ones for a 110 as the 90 parts have a bend at one end only. I have fitted the step as for the time being - it is only for bling (until I can afford that expedition trailer tent I have always wanted - and somewhere to put it). As for http://www.breedgroup.com/prod-automotive.htm I will give them a look - thanks for the link. Cheers Tod Quote Link to comment Share on other sites More sharing options...
mrtod Posted February 21, 2009 Author Share Posted February 21, 2009 Lol!!I've been fighting with rusted on bolts all afternoon so I could fit mine. Got'em on in the end though (with the aid of my trusty grinder) Hi DD I too have been grappling with my rusty nuts That said I'm happy with the step now its on. Tod PS also many thanks to western for taking the time to check the microcat. Quote Link to comment Share on other sites More sharing options...
western Posted February 21, 2009 Share Posted February 21, 2009 no problem, only took a few minutes. your 90 looks tidy. same colour as my 110. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.