Guest noggy Posted June 13, 2009 Share Posted June 13, 2009 what would i have to do, to make a series 3 bulk head fit a 90? and could i get the 90 interior and clocks etc to fit? Quote Link to comment Share on other sites More sharing options...
western Posted June 13, 2009 Share Posted June 13, 2009 be easier to fit a 90 bulkhead & keep the 90 dash intact & then if possible the Series windscreen to the top, thats if you want a backward step in forward vision. Quote Link to comment Share on other sites More sharing options...
Guest noggy Posted June 13, 2009 Share Posted June 13, 2009 the reason i ask is because my bulk head is a little worse for wear getting, and i can get my hands on a series 3 bulkhead for pennys compared to a proper 90 bulkhead. Quote Link to comment Share on other sites More sharing options...
western Posted June 13, 2009 Share Posted June 13, 2009 probaly a few minor brackets to swap over, can't be that much difference. Quote Link to comment Share on other sites More sharing options...
Gremlin Posted June 14, 2009 Share Posted June 14, 2009 the reason i ask is because my bulk head is a little worse for wear getting, and i can get my hands on a series 3 bulkhead for pennys compared to a proper 90 bulkhead. footwells are completly different, so are the pedal box locations. G Quote Link to comment Share on other sites More sharing options...
SCHREIBER Posted June 15, 2009 Share Posted June 15, 2009 They are different, but a series bulkhead will fit, but I'd persnally get a propper 90 one, normally, if you can find a series bulkhead in good nick, it cost's more than a 90 bulkhead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.