kingdong2 Posted July 14, 2009 Share Posted July 14, 2009 Hi guys i have asked the same question on the military section as well. basicly i have just bought a later type square type heater for my s11a swb as my round type heater don't work and the square type heater came with only one demister hose and would like to know are they the same hoses that are fitted to lightweights and where can i get them from graham _________________________ 1962 2a swb 200 tdi. Quote Link to comment Share on other sites More sharing options...
Rich_P Posted July 14, 2009 Share Posted July 14, 2009 I think they might be the same hoses fitted to Lightweights. From photographs they look it, and I know they follow a similar path. Where you'd get some I'm not sure. I know mine have seen better days too. Quote Link to comment Share on other sites More sharing options...
Gazzar Posted July 14, 2009 Share Posted July 14, 2009 http://www.lrseries.com/shop/product/listi...INTAKE-KIT.html Says it all, really. G. Quote Link to comment Share on other sites More sharing options...
dave88sw Posted July 14, 2009 Share Posted July 14, 2009 i think he means the internal bulkhead mounted square heater and he wants the tubes that run to the windscreen. garden centre, they have assorted diameter of hose in the fish tank section, would do the job fine. Dave Quote Link to comment Share on other sites More sharing options...
Rich_P Posted July 14, 2009 Share Posted July 14, 2009 http://www.lrseries.com/shop/product/listi...INTAKE-KIT.htmlSays it all, really. G. Says what? I have a late 2A that utilises the square smiths heater and has a similar/same setup to a Lightweight. Quote Link to comment Share on other sites More sharing options...
philbert Posted July 15, 2009 Share Posted July 15, 2009 you could try range rover classic hoses they are only around a £5 each. thats what ive got on my 2a with a round heater and they were too long and had to be cut down. Quote Link to comment Share on other sites More sharing options...
kingdong2 Posted July 15, 2009 Author Share Posted July 15, 2009 http://www.lrseries.com/shop/product/listi...INTAKE-KIT.htmlSays it all, really. G. H i gazzar thanks for the reply but thats for a s111 mines a s11a fitted with a 200 tdi and the air filter is fitted where the s111 heater motor would be. graham ____________________________ 1962 2a swb 200 tdi. Quote Link to comment Share on other sites More sharing options...
kingdong2 Posted July 15, 2009 Author Share Posted July 15, 2009 you could try range rover classic hoses they are only around a £5 each. thats what ive got on my 2a with a round heater and they were too long and had to be cut down. Hi philbert the demister pipes where they go into the heater look a bit larger than on the round heater but was woundering if i could make a vacum cleaner pipe end fit graham __________________________ 1962 2a swb 200 tdi. Quote Link to comment Share on other sites More sharing options...
Gazzar Posted July 15, 2009 Share Posted July 15, 2009 H i gazzarthanks for the reply but thats for a s111 mines a s11a fitted with a 200 tdi and the air filter is fitted where the s111 heater motor would be. graham ____________________________ 1962 2a swb 200 tdi. OOps! Mybad. Sorry. G. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.