Bowie69 Posted October 3, 2009 Share Posted October 3, 2009 'Land Rover Service Exchange Part no. STC1964E' Have googled and can't get Microcat to work on XP x64 Many thanks Quote Link to comment Share on other sites More sharing options...
western Posted October 3, 2009 Share Posted October 3, 2009 My microcat shows STC1964E as a stripped 4.0litre V8 Efi engine hope you've got loads of spare cash loafing about to pay for it. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted October 3, 2009 Author Share Posted October 3, 2009 :gulp: Well it's not new, I pulled it out of a 77,000 mile P38 last week, started pulling it apart yesterday to find some VERY clear honing marks on the bores (no change between where the rings are running and at the top/bottom of the bores where they don't). Quite pleased. Degreasing the front today I find a sticker/plate attached with the above info on it -seems like the already low mileage vehicle (relatively to age -1995) had a new lump at some point -but who knows when Suffice to say I am a very very happy bunny, especially considering I only paid around the same as it would have cost me to get a re-bore and the heads skimmed Thank you Mr Ralph, you are a gent Quote Link to comment Share on other sites More sharing options...
western Posted October 3, 2009 Share Posted October 3, 2009 sounds like it'll be a great engine, glad to help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.