sweety Posted October 15, 2009 Share Posted October 15, 2009 Hi Guy's just wondering if you could give me a few pointer please I'm wanting to remove the 6&7 seats from the boot as I won't ever use them & was wondering how you get them out as i'll be fitting my sound system in place of these seats & some extra storage. I was also wondering how you remove the front A pillar trim (drivers side)as the tweeter isn't working so need to find out if it's the wiring or if the tweeter has blown Quote Link to comment Share on other sites More sharing options...
IanS Posted October 15, 2009 Share Posted October 15, 2009 You can download the DII RAVE from this thread (3 CDs) which will explain all. Quote Link to comment Share on other sites More sharing options...
sweety Posted October 16, 2009 Author Share Posted October 16, 2009 Thanks for that Quote Link to comment Share on other sites More sharing options...
sweety Posted October 17, 2009 Author Share Posted October 17, 2009 Well managed to find out what the prob was with the tweeter, it was dead so stripped down an old set of Kenwood 2 way speakers & have fitted them in place of the factory tweeters & replaced the front door speakers with a set of 6" 2way JBL's & the sound if now fantastic at the front end Quote Link to comment Share on other sites More sharing options...
Briandisco Posted October 26, 2009 Share Posted October 26, 2009 Sounds cool! How did you get on with the seat removal? Brian Quote Link to comment Share on other sites More sharing options...
sweety Posted October 26, 2009 Author Share Posted October 26, 2009 Haven't done the seats yet but from what I can see there is a small cover where the bars go into the trim so am hoping that this cover just pulls off & I can get to the bolts Quote Link to comment Share on other sites More sharing options...
barmiebrumie Posted October 26, 2009 Share Posted October 26, 2009 Whats your plan for the unwanted seats ? John Quote Link to comment Share on other sites More sharing options...
sweety Posted November 12, 2009 Author Share Posted November 12, 2009 You can download the DII RAVE from this thread (3 CDs) which will explain all. Do I need a program to be able to read the Rave files as I can't see them now i've down loaded them Anyway had a better look at the rear seats & removed the cover that go's over the mounting bar with a screwdriver & there was the fixings 2x13mm nuts & 2x13mm bolts holding each seat in place Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted November 12, 2009 Share Posted November 12, 2009 Download 'Virtual CloneDrive', then mount the image. You could burn it to CD using Nero or similar, but what's the point Quote Link to comment Share on other sites More sharing options...
sweety Posted November 12, 2009 Author Share Posted November 12, 2009 Download 'Virtual CloneDrive', then mount the image. You could burn it to CD using Nero or similar, but what's the point Thanks very much for that Quote Link to comment Share on other sites More sharing options...
IanS Posted November 13, 2009 Share Posted November 13, 2009 Or you can burn it to CD then copy all the files to a directory on your hard drive - makes it nice & easy to use on multiple machines. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.