Joe 90 Posted November 20, 2009 Share Posted November 20, 2009 hi i am a 90 man my self but a frend of mine has just got a late vogue on a m plate, it had been standing for a while due to a air bag fault. i have fitted a new air bag to the front off side as putting a air line in the pipes to the bags showed that this was the one that was leaking, on start up it lifted a litte but not all the way up and showing the light on the dash now not doing a thing is this because it needs to be reset with a code reader. Quote Link to comment Share on other sites More sharing options...
vougese39 Posted November 22, 2009 Share Posted November 22, 2009 yes you should always replace the bags as pairs Quote Link to comment Share on other sites More sharing options...
mad_pete Posted November 22, 2009 Share Posted November 22, 2009 if any of the sensors have been seen as out of range from the ecu the fault needs to be cleared. Else the compressor may be upset as it runs all the time if you have a leak. Quote Link to comment Share on other sites More sharing options...
Joe 90 Posted November 22, 2009 Author Share Posted November 22, 2009 can the fault only be removed with rover softwear or can a snap on obd do the job. Quote Link to comment Share on other sites More sharing options...
vougese39 Posted November 22, 2009 Share Posted November 22, 2009 if you refer to the sanp on solus pro if it is uptodate possible but i think they have only just sorted the ecu reader for efi other wise a trip to a specalist or a dealer Quote Link to comment Share on other sites More sharing options...
Joe 90 Posted November 23, 2009 Author Share Posted November 23, 2009 ok thanks all. Quote Link to comment Share on other sites More sharing options...
sotal Posted November 24, 2009 Share Posted November 24, 2009 will the diagnostics cables you can buy on ebay for £15 for the suspension clear this fault? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.