Hybrid_From_Hell Posted August 10, 2011 Share Posted August 10, 2011 On a winch mountuing I belive there is for many winches a "Standard|" foot Print of the 4 x bolt holes and the distances and relationships to each other So, Can anyone tell me what these are / post up a tech drawing etc pretty please ? Nige Quote Link to comment Share on other sites More sharing options...
MrKev Posted August 10, 2011 Share Posted August 10, 2011 Like this http://www.dborc.co.uk/goodwinch/pdf/tds%20exploded%20and%20drawings.pdf and this http://www.dborc.co.uk/goodwinch/pdf/tds_mounting_channel.pdf ? Kev Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted August 10, 2011 Share Posted August 10, 2011 Yes the standard footprint for most low line winches is 4.5 Inches by 10 Inches. I've added a link to the EP9 here! (Which is in the tech archive!) Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted August 10, 2011 Author Share Posted August 10, 2011 Thankyou all Nige Quote Link to comment Share on other sites More sharing options...
zim Posted August 11, 2011 Share Posted August 11, 2011 Nige, These drawings are courtesy of Chris Pucci from pirate4x4. They're real size, so you can print them to mark the holes. Edit : i've attached a pdf, but also have a .dxf and .dwg if they're of any use to people - i can email them as i can't attach. Regards Gordon WINCH_MOUNT.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.