stuck Posted August 13, 2011 Share Posted August 13, 2011 Gents, Can the default -40 to 120 coolant temp gauge scale be changed? Quote Link to comment Share on other sites More sharing options...
bobtail84 Posted August 14, 2011 Share Posted August 14, 2011 Changed to what? Quote Link to comment Share on other sites More sharing options...
stuck Posted August 14, 2011 Author Share Posted August 14, 2011 I just want to move the scale a little so I can see the important end with a bit more clarity. If I could reduce the minimum temp to something like -10 instead of -40 it would make the gauge more meaningful. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 14, 2011 Share Posted August 14, 2011 I believe you can adjust all the gauges by editing a few text files, details are in the megatune manual. Quote Link to comment Share on other sites More sharing options...
Dave W Posted August 14, 2011 Share Posted August 14, 2011 The .ini files determine the scales of all the gauges for Megatune, you can even define your own gauges (like the fuel consumption gauge). You need to find the correct .ini file (msns-extra.ini if you're using MS1-Extra code) in your "car" folder. In the [GaugeConfigurations] section there's a definition for the temp gauge that looks like this... "Coolant Temp", "%TEMP", -40, 120, -15, 0, 95, 105, 0, 0 You can edit that line to set the limits and the warning/danger levels (yellow and red areas). The first six numbers allow you to change the low and high values, the low danger level, low warning level, high warning level, high danger level. Back the file up before you edit it, just in case Quote Link to comment Share on other sites More sharing options...
stuck Posted August 15, 2011 Author Share Posted August 15, 2011 Thanks chaps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.