Off Road Toad Posted August 25, 2011 Share Posted August 25, 2011 Can anyone help, currently converting my 90 to Td5 and reached an issue, I have a complete bulkhead wiring loom and a complete engine wiring loom to install, BUT i cannot for the life of me find on either of these the connector to plug on to the fuel pump! is this a seperate loom? if so whats the part number please as i can't find one anywhere! Steve Quote Link to comment Share on other sites More sharing options...
Dave W Posted August 25, 2011 Share Posted August 25, 2011 It's part of the chassis loom. Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted August 25, 2011 Share Posted August 25, 2011 Yep, a fairly large gauge purple/white wire which runs down the chassis loom. Plugs into the main bulkhead harness at this connector: The plain purple is for a rear 12V auxiliary supply. Quote Link to comment Share on other sites More sharing options...
Off Road Toad Posted August 26, 2011 Author Share Posted August 26, 2011 Thanks guys, that pic is most helpful! I have just bought a rear chassis td5 loom off the bay, my looms a bit worse for wear anyway. I wonder how many other 'little' things are going to crop up for this conversion Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.