farmer_ben Posted October 23, 2011 Share Posted October 23, 2011 hi ,ive done everything apart from the altenator wires! i cantunderstand it :s is there any way of wireing up the original 19j altenator wireing to the 300tdi altenator ????? any help would be nice ! Quote Link to comment Share on other sites More sharing options...
tacr2man Posted October 23, 2011 Share Posted October 23, 2011 Should not be a problem . the big brown goes to big terminal, at about 7 oclock and the brown /yellow (smaller wire ) goes to the next stud terminal at about 6 oclock the spade terminal at about 5 oclock is the tacho pulse wire HTSH Quote Link to comment Share on other sites More sharing options...
JST Posted October 24, 2011 Share Posted October 24, 2011 as he says, its only 3 wires to sort. the thickest brown one goes to the large stud on the 300 alt. you could always just use the 19J alt and change the pulley over. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.