darthdicky Posted August 9, 2006 Share Posted August 9, 2006 Does anyone know the part number for the lower door seal rubber on a 90 front door? Need them both sides if they're cheap. Seems to have a metal part that rivets to the floor if that helps describe it. Also could do with the part numbers for the rest of the side door seals as they're looking a bit perished too. Cheers, Richard Quote Link to comment Share on other sites More sharing options...
Guest diesel_jim Posted August 9, 2006 Share Posted August 9, 2006 Lower door seals (that rivet on) : ALR6250 x2 (one each side) rivets : (rivet, steel, pop) : ALR6280 x20 little square foam block that sticks at the "back" of the door (nearest the rear of the vehicle, lower corner) : AWR3140 x2 main door seal: several to choose from; "county" RH ALR4936 (does county mean it doesn't leak quite as much? ) county LH ALR4937 these are 1 piece seals. they do the "SV" seal kit, which is in 2 parts (i assume so you can split the roof and take it off) seal, front door, RH, hinge side ALR6134 seal, front door, RH, lock side ALR6136 seal, front door, LH, hinge side ALR6133 seal, front door, LH, lock side ALR6135 Quote Link to comment Share on other sites More sharing options...
western Posted August 9, 2006 Share Posted August 9, 2006 Does anyone know the part number for the lower door seal rubber on a 90 front door? Need them both sides if they're cheap. Seems to have a metal part that rivets to the floor if that helps describe it.Also could do with the part numbers for the rest of the side door seals as they're looking a bit perished too. Cheers, Richard bottom seal that rivets to sill ---- MWC6130 x 2 upto VIN LA933876 or ALR 6250 X 2 from VIN LA633877 Front door seal [fits around door aperture --- MWC1080 Front door right MWC1081 Front door left ---- both upto VIN LA933876 or ALR4936 right ALR4937 left ---- both from VIN LA633877 Quote Link to comment Share on other sites More sharing options...
Ex Member Posted August 15, 2006 Share Posted August 15, 2006 So what are people's secret easy ways to install these *&^#*&%^#*%# things? The holes never line up. I suppose a decent punch to make holes that match the sill? Quote Link to comment Share on other sites More sharing options...
western Posted August 15, 2006 Share Posted August 15, 2006 Haven't changed mine yet, but I'll probably make it fit Quote Link to comment Share on other sites More sharing options...
darthdicky Posted August 20, 2006 Author Share Posted August 20, 2006 Cheers guys, looks like I need a MWC6130 then. The main seal can wait until everything else is fixed! Richard Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.