Mark Posted January 16, 2012 Share Posted January 16, 2012 Written by our very own superpants, anyone doing wiring on their truck should have a quick read of this on Instructables Enjoy Mark Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted January 16, 2012 Share Posted January 16, 2012 To the tech archive with him! Quote Link to comment Share on other sites More sharing options...
Superpants Posted January 17, 2012 Share Posted January 17, 2012 Thanks! One of the reasons I wrote this was that I felt that it was such a perennial question here, people must be interested in the subject! Mike Quote Link to comment Share on other sites More sharing options...
Team Idris Posted January 17, 2012 Share Posted January 17, 2012 Looks good does that. Best move I made was buying proper ratchet crimps. Those flat pressed plate pliers just don't grab the wire like the proper thing for the job! I bet they've paid for themselves by not wrecking terminals (and then getting angry) Quote Link to comment Share on other sites More sharing options...
MrKev Posted January 17, 2012 Share Posted January 17, 2012 Great write up there Mike, and a worthwhile reference for the tech archive. Kev Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.