stuck Posted January 18, 2012 Share Posted January 18, 2012 They seem to be the flavour of the month but quick question if you don't mind. On the back of my 110 I have two work lights (they don't come on when I select reverse) one of these has a broken lense, is this an automatic fail? Should I remove it or replace it before the MOT? Thanks, Mick. Quote Link to comment Share on other sites More sharing options...
GBMUD Posted January 18, 2012 Share Posted January 18, 2012 Not testable in itself. If is has sharp edges it may be a reason for failure, just cover it for the test to be sure. Chris Quote Link to comment Share on other sites More sharing options...
western Posted January 18, 2012 Share Posted January 18, 2012 as above not a testable item, but might get a comment from the tester if he spots it, cover of replace before going to the test. Quote Link to comment Share on other sites More sharing options...
CwazyWabbit Posted January 18, 2012 Share Posted January 18, 2012 Duct/Duck tape is great for covering sharp edges to pass MOT's, mate was advised by MOT chap to tape up rusty door bottoms on his old banger to get it through MOT .... although it was a few years back Quote Link to comment Share on other sites More sharing options...
stuck Posted January 18, 2012 Author Share Posted January 18, 2012 Cheers chaps. Much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.