dailysleaze Posted October 7, 2012 Share Posted October 7, 2012 I want to fit an earth cable from the starter motor to the battery. Anyone know how long it needs to be and what the stud size is on starter motor bolts below? Quote Link to comment Share on other sites More sharing options...
western Posted October 7, 2012 Share Posted October 7, 2012 there should already be a engine/gearbox earth cable fitted, at the gearbox to transferbox joint then to battery. Quote Link to comment Share on other sites More sharing options...
dailysleaze Posted October 7, 2012 Author Share Posted October 7, 2012 There is one but i'm getting 9.9v when cranking on a fully charged brand new battery, so I want to give it the best route possible. Been reading this: http://forums.lr4x4.com/index.php?showtopic=68637 Quote Link to comment Share on other sites More sharing options...
vulcan bomber Posted October 7, 2012 Share Posted October 7, 2012 studs are m10 battery's tend to be m8. Quote Link to comment Share on other sites More sharing options...
western Posted October 7, 2012 Share Posted October 7, 2012 is the existing cable clean & tight & in good condition ? maybe the starter cables need cleaning too. changed my 200tdi's earth cable because it was getting old 7 hard, the new one is twice as thick & more flexible. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.