sammyb Posted November 21, 2012 Author Share Posted November 21, 2012 Thank you Quote Link to comment Share on other sites More sharing options...
Maverik Posted November 21, 2012 Share Posted November 21, 2012 this is mine Quote Link to comment Share on other sites More sharing options...
Frax Posted November 21, 2012 Share Posted November 21, 2012 Hi Sammy Was out getting yer bits, packed and ready to go but not my best packing job, anyway its dark but got you some pic's of mine. Fitted a bit of stainless plate behind the plug as it was hard to slide the other part in for the carpet and also bought a cover as my kids as just daft enough to stick their fingers in the hole. mind you they would have only done it once. Quote Link to comment Share on other sites More sharing options...
sammyb Posted November 21, 2012 Author Share Posted November 21, 2012 thanks for the pics Mav, have you used the standard seat belt bolt holes for your harness eyelets? Quote Link to comment Share on other sites More sharing options...
JeffR Posted November 22, 2012 Share Posted November 22, 2012 I fitted a pair of recaros to my old 110 by making up a large plate of 3mm ally to which the seat was bolted. this plate was then attached to the seat box using half a dozen bonnet pins. Could lift the whole seat an plate out in under 30 seconds. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.