ajh Posted November 23, 2012 Share Posted November 23, 2012 I am fairly sure I know the answer; but if the rear tub is slightly too low in the front but fine in the rear corner so that the sides when bolted in place have a gap towards the front between them and the tub does this mean I need to loosen all the front tub fixings and shim it up into place to get things to align correctly? Quote Link to comment Share on other sites More sharing options...
Frax Posted November 23, 2012 Share Posted November 23, 2012 Have you got a 110 ? Quote Link to comment Share on other sites More sharing options...
Maverik Posted November 23, 2012 Share Posted November 23, 2012 Not entirly sure what you mean, photo might help... Quote Link to comment Share on other sites More sharing options...
C18RCH Posted November 23, 2012 Share Posted November 23, 2012 If you mean a gap between the upper sides and the tub at the door junction then you just need to loosen the tub brakets at the front of the tub, jack it up (the tub that is) gently and it a suitable place, and re-tighten. There is some adjustment for height on the brackets, or there should be. Quote Link to comment Share on other sites More sharing options...
ajh Posted November 23, 2012 Author Share Posted November 23, 2012 OK, that confirms what I thought. Hopefully that means I'll get the body all aligned and together today. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.