tacr2man Posted April 23, 2013 Share Posted April 23, 2013 Looks like I will be using a td5 and intercooler (to start probably bigger later) , on my TD6 into 110 build . The question is , on a TD5 chassis is the first crossmember flat , as I have two raised mounts for my 110 V8 rad, ? At the mo , therad wont go against the slam panel as the intercooler is hitting it the rad looks like it sits on two pegs on the crossmember or are they bolted onto inner wing sides . Dont have acess to a td5 to look at ! Quote Link to comment Share on other sites More sharing options...
Aragorn Posted April 23, 2013 Share Posted April 23, 2013 I can take a photo of the TD5 front crossmember if you want? At the top theres some bracket that bolts to inner wing i think. Quote Link to comment Share on other sites More sharing options...
tacr2man Posted April 23, 2013 Author Share Posted April 23, 2013 that would be real helpful , TYIA Quote Link to comment Share on other sites More sharing options...
Aragorn Posted April 24, 2013 Share Posted April 24, 2013 Crossmember itself is flat: https://www.dropbox.com/s/uz66xp2sprqwifo/IMG_20130423_220018.jpg Presumably the rad mounts to the two holes in it? Quote Link to comment Share on other sites More sharing options...
tacr2man Posted April 24, 2013 Author Share Posted April 24, 2013 Thanks a bundle for the piccy very clear and exactly what i needed , job for the anglegrinder i think Quote Link to comment Share on other sites More sharing options...
steve200TDi Posted April 24, 2013 Share Posted April 24, 2013 Hi, Just a thought, but does it not mount onto the two post either side on top of the chassis. I will try and have a look at my TD5 when I get home tonight. Steve Quote Link to comment Share on other sites More sharing options...
Aragorn Posted April 24, 2013 Share Posted April 24, 2013 You could be right... Pic of TD5 rad: http://www.brookwell.co.uk/wp-content/themes/brookwell/getimg.php?p=PCC001020&q=pi Different angle shot of pin: https://www.dropbox.com/s/r1aacq6lzmiy349/IMG_20130423_220028.jpg?m Quote Link to comment Share on other sites More sharing options...
tacr2man Posted April 24, 2013 Author Share Posted April 24, 2013 You could be right...Pic of TD5 rad: http://www.brookwell.co.uk/wp-content/themes/brookwell/getimg.php?p=PCC001020&q=pi Different angle shot of pin: https://www.dropbox.com/s/r1aacq6lzmiy349/IMG_20130423_220028.jpg?m Yes thats the pin mounts as visible in pic 1 thanks once again The upper mounts bolt inside the wing sides , so got to get those as well , the OE V8 ones are different , so think will need a different bonnet prop aswell, goes on and on doesnt it ? Quote Link to comment Share on other sites More sharing options...
tacr2man Posted April 25, 2013 Author Share Posted April 25, 2013 Aragorn can I trouble you again are you able to tell me height of base of pin above the chassis rail ? Quote Link to comment Share on other sites More sharing options...
Aragorn Posted April 25, 2013 Share Posted April 25, 2013 I can, it will be late on sunday before i'm back home though! I'll try to do it monday, give me a prod sunday night/monday morning incase i forget! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.