cookie64 Posted July 3, 2013 Share Posted July 3, 2013 Hi Does anybody know what the little screw is that holds the lever to the end of the door lock barrels I.e thread, length, part no Have included a diagram which shows it at the end of the lock assembly Thanks Tom Quote Link to comment Share on other sites More sharing options...
simonb Posted July 3, 2013 Share Posted July 3, 2013 If you mean the ST1978M, on my 300Tdi, I used a M3 machine screw around 10mm in length when i replaced the lock barrels - the original screw was all corroded. Quote Link to comment Share on other sites More sharing options...
western Posted July 3, 2013 Share Posted July 3, 2013 the STM number is a drawing number not a part number. That screw is not listed as a seperate item, only come pre-fitted to new front door handles. you'll have to find a suitable replacement based on Simon's info above. Quote Link to comment Share on other sites More sharing options...
lee18 Posted January 20 Share Posted January 20 Can anyone tell me the part number of the retaining sleeve that both No 8 & 9 point too? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
western Posted January 20 Share Posted January 20 No part number is part of the FRONT door handle assembly, See item 1 in https://new.lrcat.com/#!/1228/7683/7684/714/8189 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.