porsche Posted July 10, 2013 Share Posted July 10, 2013 does anyone know what the torque setting is for the nut securing drop arm on steering box please , I seem to have a bit of vertical movement !!! Quote Link to comment Share on other sites More sharing options...
jbs Posted July 10, 2013 Share Posted July 10, 2013 4 Bolt box drop arm securing nut for solid drop arms according to the L/R manual I have is 176nm Quote Link to comment Share on other sites More sharing options...
porsche Posted July 10, 2013 Author Share Posted July 10, 2013 struth , any idea on nut size ?? Quote Link to comment Share on other sites More sharing options...
mickeyw Posted July 10, 2013 Share Posted July 10, 2013 You need a 1-5/16" socket Quote Link to comment Share on other sites More sharing options...
jbs Posted July 11, 2013 Share Posted July 11, 2013 What I did with my previous solid drop arm-as I was'nt going back to that gopping swan neck was to use threadlock to permanently affix it onto the splined shaft, Ok it was a little extreme but it worked all the same and I obviously tightened the large nut with a largish torque wrench too John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.