EFILandRover Posted October 5, 2006 Share Posted October 5, 2006 Can people post their measurements from the ground to the centre of the bulkhead bolt? If you've seen my thread in the projects section you can see how high it came out, and I didnt want it that high . Still, its a good excuse to go 37's Anyone is welcome to post here. All the winch challenge vehicles are perfectly welcome as a comparison to mine. I equal 710mm from the ground to the bolt, on tyres measuring a tad over 33" Quote Link to comment Share on other sites More sharing options...
Tonk Posted October 5, 2006 Share Posted October 5, 2006 wot do you mean by the bulkhead bolt? the one that holds it to the front outrigger? i'll try and measure tonight, although mine isn't completely standard Quote Link to comment Share on other sites More sharing options...
EFILandRover Posted October 5, 2006 Author Share Posted October 5, 2006 wot do you mean by the bulkhead bolt? the one that holds it to the front outrigger?i'll try and measure tonight, although mine isn't completely standard Yes, the big one that holds it to the outrigger Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted October 5, 2006 Share Posted October 5, 2006 Erm - tyre size is going to have a fairly major impact on height !!!!!!! Better to measure the gaps under the bump stops ? Nige Quote Link to comment Share on other sites More sharing options...
EFILandRover Posted October 5, 2006 Author Share Posted October 5, 2006 Erm - tyre size is going to have a fairly major impact on height !!!!!!!Better to measure the gaps under the bump stops ? Nige Could be, but im wanting to see how far off the ground your rover is B) Quote Link to comment Share on other sites More sharing options...
Diesel_90 Posted October 5, 2006 Share Posted October 5, 2006 i can remember that to the top of the wing is 51 and a half inches on my 90 B) Quote Link to comment Share on other sites More sharing options...
Tonk Posted October 5, 2006 Share Posted October 5, 2006 think thats abut wot mine is too Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.